Merci Merci:  0
Likes Likes:  0
Dislikes Dislikes:  0
Affiche les résultats de 1 à 5 sur 5

Sujet : cccam 2.3.0 et oscam
Le problème de ce sujet a été résolu / Voir les messages utiles


  1. #1
    Super Modérateur Avatar de cachou
    Inscrit
    Sep 2012
    Messages
    4 796
    Récepteur
    dreambox 800hdSE
    TV
    sansung 65p led
    Remerciement / J'aime

    cccam 2.3.0 et oscam

    Oscam est client sur cccam 2.3.0 mais dans webif 0 card cccam est connecté.Merci pour votre aide


  2. #2
    DZSatien Initié Avatar de hdmm
    Inscrit
    Sep 2012
    Messages
    643
    Récepteur
    vu+
    TV
    lg42 3d
    Remerciement / J'aime
    salut post ta config on verra bien comment on peut t'aider

  3. #3
    Super Modérateur Avatar de cachou
    Inscrit
    Sep 2012
    Messages
    4 796
    Récepteur
    dreambox 800hdSE
    TV
    sansung 65p led
    Remerciement / J'aime
    # CCcam team uvadi CCcam v2.3.0## Special greets go to all our friends all over the world, you know who you are!## Specjalne podziekowania dla Ludzi z Polski, dzieki ktorym jest duzo nowych funkcji w wersji 2.0.0 # Ostatnim razem zapomnielismy o nich wspomniec w readme. DZieki Chlopaki!######################################### ############################### friends ################################################## ###################### syntax for to add a friend user to CCcam with the max up hops limit (default = 5)# sharing of emus (default = 1), allow emm (default = 1), and optional# downshare limits per share (default = no limits) and optional# downshare limits per share based on caid:id:sid# and optional timeslots in which share is valid (to block channels on box of children after 19:00 for instance)# if no timeslot is defined 24 hrs a day is used# emus are shared only one level down, even if no limits given## max username length 20# password length 'unlimited'##F: ( { caid:id(:downhops), caid:id(:downhops), ... } { caid:id:sid, caid:id:sid, ... } { begintime-endtime, ... } ) hostname/ip address## example:## F: user2 pass2## user1 gets all our shares at max 5 hops from us# (our local cards + max five hops away). He can share down to his own# clients. He also receive emu shares (if he has 'yes' behind his C: entry),# and is allowed to send us emm.# F: user2 pass2 0 1 0 { 0100:000080, 0622:000000:1, 0500:022610:2 }## user2 gets only our local cards but no 0100:000080.# and our 0622:000000 cards only for himself (1 hop down),# and 0500 cards for himself plus one additional hop down.# He also gets our emus, and is NOT allowed to send us emm (updates).## F: user3 pass3 5 0 1 { 0:0:3, 0100:000080:1 }## user3 gets all cards at a maximum of 5 hops away from us,# and get's to share them down two further levels beyond his own level.# But he is not allowed to share 0100:000080 down to other users.# He gets no emus from us, and he is allowed to send us emm.## F: user4 pass4 5 0 1 { 0:0:3, 0100:000080:1 } { 0100:000080:15df }## user4 gets all cards at a maximum of 5 hops away from us,# and get's to share them down two further levels beyond his own level.# But he is not allowed to share 0100:000080 down to other users.# He gets no emus from us, and he is allowed to send us emm.# He is also not allowed to view channel 0100:000080:15df## F: user4 pass4 5 0 1 { } { } { 12:00-17:00, 19:00-20:00 }## user4 gets all cards at a maximum of 5 hops away from us,# and get's to share them down two further levels beyond his own level.# the share is only valid between 12:00 and 17:00 and between 19:00 and 20:00# outside these hours the share will not give cw's to the client### F: user5 pass5 5 1 1 { } { } { } 192.168.1.1## user5 gets all cards at a maximum of 5 hops away from us# user5 is only allowed to connect from the host 192.168.1.1 ################################################## ###################### connections ################################################## ###################### syntax for to add a client connection to other CCcam# add yes on end to use friends emus (non public private key/emu,etc...),# but only works when corresponding F line on server has '1' for # optional limits just like F line, but for incoming shares (ignore shares more than 'uphops' away)##C: ( { caid:id(:uphops), caid:id(:uphops), ... } )##note: if {} limits are added, cannot be omitted. Use either yes or no.## example:##C: 192.168.0.44 12570 user2 pass2# C: 192.168.1.2 12000 user2 pass2# connects to CCcam without use of friends emus## C: 192.168.1.2 12000 user3 pass3 yes# connects to CCcam, and receives friends emus also.# syntax for to add newcamd server connection##N: ## example:## N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14## add a newcamd card, give it an offset of 2 hops, in the share list## N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 2## stealthy login on newcamd server:## N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 1 1## stealth modes: 0 = disabled, 1 = mgcamd new, 2 = mgcamd old, 3 = evocamd, 4 = generic# syntax for to add radegast server connection##R: ## example:## R: 127.0.0.1 678 0100 000080# syntax for to add camd3 connection##L: ## example:## L: 127.0.0.1 567 dummy dummy 0100 000080# syntax for add gbox connection##G: ## support optional limits just like C line (ignore shares more than 'uphops' away)# { caid:id(:uphops), caid:id(:uphops), ... }## example:## G: AABBCCDD my.address.tv 2500 12345678 peer.address.tv 2500############################################## ######################### Other config settings ################################################## ###################### server shall listen on this port pro incoming connections# default port is 12000, disable server with parm -s or set port 0#SERVER LISTEN PORT : 15000# server can give some info about server and client connections# and cardinfo using telnet or webbrowser.## Switch on/off access to info# default is yes##ALLOW TELNETINFO: noALLOW WEBINFO: yes# Show extended client info when showing client list# default is yes##SHOW EXTENEDED CLIENT INFO : no# The webinfo service can be protected with a username and password.# This is switched off by default#WEBINFO USERNAME : cachouWEBINFO PASSWORD : cachou100569# The telnetinfo service can be protected with a username and password.# This is switched off by default##TELNETINFO USERNAME : #TELNETINFO PASSWORD : # default port for telnet is 16000# default port for web is 16001# supported commands:# info# activeclients# clients# servers# shares# providers# entitlements# example use:# echo servers | telnet localhost 16000# go with your browser to http://ip_CCcam_server:16001##TELNETINFO LISTEN PORT : 16000WEBINFO LISTEN PORT : 13580# time in seconds to keep On Screen Display active.# default is 0 (turned off)##ZAP OSD TIME : 3# username used to show popup (default : root)#OSD USERNAME : root# password used to show popup (default : dreambox)#OSD PASSWORD : dreambox# port used to show popup (default : 80)#OSD PORT : 80# Serial reader config. Add as many as you have attached too your system# replaces old name 'PHOENIX READER PATH', but still works.# default is none# optionally add readertype : phoenix,mouse,uniprog,sc8in1,smartreader+# (when non readertype given defaults to uniprog (e.g. for mastera))## SERIAL READER : ## example##SERIAL READER : /dev/tts/0# Serial reader smartcard write delay.# Setting to finetune smartcard write speed, optimal setting depends on speed of system, and# speed of card. Default value is calculated, but can overrule by setting.# Use number of microseconds delay between bytes, 0 = no delay, -1 = calculated default# Note: huge difference between values 0 and 1, because of schedular overhead## SMARTCARD WRITE DELAY : ## example, 10ms write delay on smartcard in reader attached to /dev/ttyUSB0##SMARTCARD WRITE DELAY: /dev/ttyUSB0 10000## NOTE on sc8in1; because 8 smartcards are used on the same devicename, use# devicename_0 .. devicename_7 for settings which require devicename to make# settings per smartcard. example /dev/ttyS0_0, /dev/ttyS0_1 ..# example, 8ms write delay between bytes to smartcard on last sc8in1 channel, attached to /dev/tts/0##SMARTCARD WRITE DELAY: /dev/tts/0_7 8000# Smartcard clock speed override# Setting override specified speed for smartcard.# Don't add setting unless you're sure what you're doing.# In 99% of the cases the reader selects the optimal speed.# Adding this setting either slows your card down, or might destroy it.## SMARTCARD CLOCK FREQUENCY : ## example##SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 5500000# if timing should be shown in OSD and debug output# default is no (turned off)##SHOW TIMING : yes# enables mini OSD which shows server(type), cardreader, keys or fta only# default is no (turned off)##MINI OSD : yes# turns debugging on and off# default is no (turned off)##DEBUG : yes# should CCcam try to read and parse newcamd.conf for server connections# default is no (turned off)##NEWCAMD CONF : yes# configure what EMM blocker you want. Add as many as readers you have attached# default is blocking nothing## B: /dev/sci0 01# 00 - nothing# 01 - sa blocked# 02 - ua blocked# 04 - ga blocked# and sum of for combinations##examples##B: /dev/tts/0 07#B: /dev/sci0 01# disable all EMM readers (clientside setting)# saves lots of CPU, but you won't get any updates anymore# (unless you get updates from your clients)## default: no##DISABLE EMM : yes# control how to deal with global (ga) EMM readers (clientside setting)# can avoid global (possibly noisy) emm being sent over the network# shared and unique emm is not affected by this setting# to block all emm, use DISABLE EMM setting instead## 0 = ignore all global emm# 1 = accept a small amount of global emm# 2 = accept all global emm## default: 2 (handle all global emm)## example: seriously reduce the global emm traffic, but allow limited# global emm when a smartcard does not work (possibly because it needs an update)##GLOBAL EMM : 1# with this setting you can# allow a client on two hops away# to send the updates to the cardserver## default : no##EXTRA EMM LEVEL : yes# with this setting you can# configure how many emm listeners are started.# for example use 2 when recording# and viewing different systems and both need constant updates## default : 1##EMM THREADS : 1# overrule the nds boxkey (4 byte hex)## BOXKEY: ##example##BOXKEY: /dev/sci0 00 11 22 33# set card pin# * please be very careful with this option as you could lock your card *## PIN: ##example##PIN: /dev/sci0 1234# overrule the irdeto camkey (8 byte hex), default 11 22 33 44 55 66 77 88## CAMKEY: ##example##CAMKEY: /dev/sci0 11 22 33 44 55 66 77 88# overrule the irdeto camdata (64 byte hex)# trailing zero bytes can be omitted# default for unknown ASC's is 11 22 33 44 55 66 77 88 00 00 .. 00, known ASC's have other defaults## CAMDATA: ... ##example, when only the first 15 camdata bytes are nonzero##CAMDATA: /dev/sci0 11 22 33 44 55 66 77 88 99 aa bb cc dd ee ff# custom add id's for BEEF patched cards## BEEF ID: ##example##BEEF ID: 4101 0 0 0 0 0 0 0 /dev/sci0# what Softcam.Key should CCcam try to read# defaults to /var/keys/SoftCam.Key#SOFTKEY FILE : /var/keys/SoftCam.Key# what AutoRoll.Key should CCcam try to read# defaults to /var/keys/AutoRoll.Key#AUTOROLL FILE : /var/keys/AutoRoll.Key# what constant.cw should CCcam try to read# defaults to /var/keys/constant.cw# file content can be like## ca4:id6:sid4:pmtpid4:ecmpid4:key16(01 02 03...)#STATIC CW FILE : /var/keys/constant.cw# in this file you can configure what CAIDs CCcam should prefer or ignore# defaults to /var/etc/CCcam.prio# file content can have ignores (I) and prio lists (P)## note 1: I line affects both for ecm and emm (receive no emm on ignored systems)# P line only affects ecm choice (emm still received for all available systems, not just the priority system)## note 2: ident 0 means 'all idents'. So 'caid:0' is the same as 'caid'.## note 3: for some systems (e.g. nagra (caid 18xx)), the ident is not known at the time the# prio lists are checked. In that case, matching is done on caid only, even if the P line# defines nonzero idents. So for example '1801:401' behaves the same as '1801' in a P line# I lines work differently, they are checked two times, once before ecm or emm is received, again# after ecm or emm are received (and nagra ident should be known)# P lines are only checked once, before ecm received.## note 4: if a P line contains caid:ident pairs which are not available for the current# channel, that P line is not used for that channel.# Example, channel has systems 626, 1801:401 then P line with "1801,100:96,626" is ignored by that channel,# because channel doesn't have 100:96.# But P line with "1801" works, and also "626,1801" will work for channel## note 5: P lines are parsed in the order in which they are found in the prio file.# Only the first matching P line is used## situation 1: ignore allways this caid, all idents, on all channels# I: caid## situation 2: ignore allways this caid/ident pair# I: caid:ident## situation 3: ignore this caid/ident pair, on channel 'sid'# I: caid:ident:sid## situation 4: when both caid1 and caid2 exist for a channel, prefer caid1 over caid2# P: caid1, caid2## situation 5: when caid1:ident1 till caidN:identN exist for a channel, use them in order of this list.# P: caid1:ident1, caid2:ident2, .., caidN:identN## situation 6: when caid1:ident1 till caidN:identN exist for channel 'sid', use them in order of this list.# Sid on first caid/ident pair identifies sid for which list is used. All other sids ignore this list.# P: caid1:ident1:sid, caid2:ident2, .., caidN:identN##CAID PRIO FILE : /var/etc/CCcam.prio# # In this file all provider idents are defined# The info from this file is being used in the web interface# format:# "Provider description"## PROVIDERINFO FILE : /var/etc/CCcam.providers# # In this file all channel idents are defined# The info from this file is being used in the web interface# format:# caid:ident:sid "Channel description"## CHANNELINFO FILE : /var/etc/CCcam.channelinfo# write wrong logins to file# defaults is off##LOG WARNINGS : /tmp/warnings.txt# global setting for stealthy login to newcamd/newcs server, N line can overrule# stealth modes: 0 = disabled, 1 = mgcamd new, 2 = mgcamd old, 3 = evocamd, 4 = generic# default: 0##NEWCAMD STEALTH : 0# load balancing between identical cards, list device names of card readers containing identical cards,# optionally followed by a list of service id's which are to be excluded from loadbalancing## LOADBALANCE : .. { , .. , }## multiple loadbalance groups can be configured, by adding multiple lines# warning: restart is required, when loadbalance group config changes##example 1: load balance requests for three identical cards## LOADBALANCE : /dev/ttyS0 /dev/ttyS1 /dev/ttyS2##example 2: load balance requests for two almost identical cards, sid 0df3 and 0de1 are only available#on one of the cards, so requests for these sids shouldn't be loadbalanced## LOADBALANCE : /dev/ttyS5 /dev/ttyS6 { 0df3,0de1 }# in version 1.2.1 and lower there was a problem which could lead to disconnecting clients# in version 1.4.0 network load was significantly reduced# in version 1.7.0 dangerous password bug was fixed# in order to take advantage of these fixes, all clients should upgrade# with this setting you can force that clients at least use a certain version otherwise they are denied when logging in## default : accept all versions##example 1: avoid disconnecting clients problem##MINIMUM CLIENT VERSION : 1.3.0##example 2: achieve network load decrease##MINIMUM CLIENT VERSION : 2.2.0##example 3: don't allow potentially wrong passwords (pre 1.7.0 has password bug)##MINIMUM CLIENT VERSION : 1.7.0# Irdeto smartcards: option to disable smart chid checking for irdeto smartcards.# Default, only chids advertised by card are accepted.# This avoids a lot of unwanted card traffic## But if smartcard has hidden/unknown chids, all chids should be tried.# In that case specify 'TRY ALL CHIDS' option for cardreader.# Use with care, enabling option causes more card traffic.# Only use setting when some channels in your subscription don't work without it.# note: if even this setting don't help decode all channels, try using# commandline arg -l, to disable all self-learning features (warning: slower)##TRY ALL CHIDS : ##example: card in /dev/ttyUSB0 gets ecm for all possible chids, not#just the chids it officially supports##TRY ALL CHIDS : /dev/ttyUSB0# perform smartcard post init commands## POSTINIT : ()## send commands in 'filename' to 'device', and delete 'filename' when# optional 'autodelete' argument nonzero##example:##POSTINIT : /dev/sci0 /tmp/postinit##example /tmp/postinit contents:#c134000003000000#c13201000a# Option to override autodetected dvb api version. Restart needed.##DVB API: ## -1 = no dvb, 1 = dvb api 1, 3 = dvb api 3## WARNING: only use when autodetect fails!##example, disable nonworking dvb hardware:DVB API: -1# Option to set global share limits##GLOBAL LIMITS: { caid:id(:downhops), caid:id(:downhops), ... }##example:##GLOBAL LIMITS : { 0100:000080, 0622:000000:1, 0500:000000:2 }## all users get no 0100:000080.# and our 0622:000000 cards only for themself (1 hop down),# and 0500 cards for themself plus one additional hop down.# global limits are overridden by client specific limits (see F:)# Option to reject shares with less than required downhops on clientside##MINIMUM DOWNHOPS: ## default: 0 (don't ignore any shares)##example:##MINIMUM DOWNHOPS: 1## ignore shares that have less than 1 'downhops' (i.e. can not be shared# further down to other clients)# Option to ignore all shares that go through a certain node##IGNORE NODE: ##example, ignore two nodes:##IGNORE NODE: ccd536ab515767ad#IGNORE NODE: aad536ab515761af# The seca handler is used to better support simulcrypt on the same ident# # With this setting you can change the behaviour of how SECA has to be used# This setting is ignored unless SECA2/SECA3 simulcrypt is detected!!## When disabled CCcam behaves like previous versions## When "prefer SECA3 over SECA2" is enabled try to use SECA3 ecm first, then SECA2# # When "Ignore SECA2" is enabled, ignore all SECA2 ecm so a SECA3 card will not get SECA2 request which it cannot handle## When "Ignore SECA3" is enabled, ignore all SECA3 ecm so a SECA2 card will not get SECA3 request which it cannot handle# ## The following settings can be used## SECA HANDLER: # : 0 = disabled, 1 = prefer SECA3 over SECA2, 2 = prefer SECA2 over SECA3, 3 = Ignore SECA2, 4 = Ignore SECA3## default: 1## Example try to use SECA3 ecm first, then SECA2#SECA HANDLER: 1## Example try to use SECA2 ecm first, then SECA3#SECA HANDLER: 2## Example to ignore all SECA2 ecm so a SECA3 card will not get SECA2 request which it cannot handle#SECA HANDLER: 3## Example to ignore all SECA3 ecm so a SECA2 card will not get SECA3 request which it cannot handle#SECA HANDLER: 4# Configure limited list of accepted sids for smartcard# When omitted, all sids are allowed.# Can work together with LOADBALANCE configuration (sids which are not allowed will be automatically left out of the loadbalance)## SMARTCARD SID ASSIGN : { , , ... }## is the reader devicenode# limits the total number of sids assigned to the card (0 = use length of sid list)# { .. } lists the sids that are assigned to the smartcard, when omitted, is used to auto assign sids## when is larger than the length of the sidlist, the remainder of the sids are auto assigned, till the list reaches # Check entitlement output for realtime assignment list## WARNING: when SMARTCARD SID ASSIGN config changes, restart is required before settings take effect##example1: smartcard in device /dev/ttyUSB0 only handles requests for sids df3, df4, df5##SMARTCARD SID ASSIGN : /dev/ttyUSB0 0 { 0df3,0df4,0df5 }##example2: smartcard in device /dev/ttyUSB0 handles requests for max 5 sids, auto assigned in the order of occurance. A request for a 6th sid will be denied.##SMARTCARD SID ASSIGN : /dev/ttyUSB0 5##example3: smartcard in device /dev/ttyUSB0 handles requests for max 5 sids, 3 of which are df3, df4, df5, remaining 2 are auto assigned##SMARTCARD SID ASSIGN : /dev/ttyUSB0 5 { 0df3,0df4,0df5 }# Configure list of sids which are not to be handled by smartcard# When omitted, all sids are allowed (or SMARTCARD SID ASSIGN list is allowed, if available)# Don't use together with (fixed) SMARTCARD SID ASSIGN list; use one or the other, depending on which gives the shortest list# Can work together with dynamic SMARTCARD SID ASSIGN list.# Can work together with LOADBALANCE configuration (sids which are rejected will be automatically left out of the loadbalance)##SMARTCARD SID REJECT: { , , ... }## is the reader devicenode# { .. } lists the sids that are to be rejected on the smartcard###example1: smartcard in device /dev/ttyUSB0 should not handle requests for sids df3, df4, df5##SMARTCARD SID REJECT: /dev/ttyUSB0 { 0df3,0df4,0df5 }# Option to limit the number of sids active on a single smartcard within a given time period## SID LIMIT: ## example: handle max 4 different sids every 11 seconds## SID LIMIT: /dev/sci0 4 11# Option to overrule the number of sci devices to be opened##SCIDEVICES: ##example, don't open any sci devices##SCIDEVICES: 0##example, force 2 devices to be opened##SCIDEVICES: 2## When omitted, attempt to open an autodetected number of sci devices# WARNING: restart is required before a new SCIDEVICES limit takes effect# *Merry Christmas* from aff-board.comje n' arrive pas a bien editer mon fichier excuse moi et merci- - - Mise à jour - - -Mon fichier au départ est bien rangé mais quand j' envoi la réponse tout se met a la ligne- - - Mise à jour - - -Mon fichier au départ est bien rangé mais quand j' envoi la réponse tout se met a la ligne
    Dernière édition par cachou; 27-12-2012 à 20:02

  4. #4
    DZSatien Initié Avatar de manu258
    Inscrit
    Oct 2011
    Âge
    46
    Messages
    701
    Récepteur
    vu+uno
    TV
    samsung
    Remerciement / J'aime
    ouai sa c'est un log un peut trop long
    c'est une config qu'on veut avec dcc ou via webif
    oscam.config dans var tuxbox config tout le dossier.

  5. #5
    Super Modérateur Avatar de cachou
    Inscrit
    Sep 2012
    Messages
    4 796
    Récepteur
    dreambox 800hdSE
    TV
    sansung 65p led
    Remerciement / J'aime
    je n' arrive pas a bien editer mon fichier desolé, dans oscam.server j' ai déclaré ma fline de cccam2.3.0, est-ce qu' il faut que je déclare cccam dans oscam.conf. Je suis sur pc debian avec vdr et sac-ng en camd35 udp sur oscam.
    Dernière édition par cachou; 27-12-2012 à 20:37

Sujets similaires

  1. Réponses: 4
    Dernier message: 10-06-2013, 10:53
  2. Problème Résolu CCcam / Oscam ou Oscam seul???
    Par falcon40 dans le forum Entraide E2
    Réponses: 0
    Dernier message: 11-02-2012, 21:23
  3. Install OSCAM seul, ou CCcam/OSCAM pour Orange Sat
    Par gpmaster dans le forum Entraide CCcam
    Réponses: 2
    Dernier message: 05-11-2011, 13:51
  4. Cccam 2.1.3/Oscam 1.0, oscam ne marche plus
    Par basamir dans le forum Oscam Soft, Tuto ,Config
    Réponses: 3
    Dernier message: 22-10-2011, 17:00
  5. TNTSAT: Oscam au lieu de oscam+cccam et mêmes bénefs sharing....
    Par bigourdan7 dans le forum Réception TNT
    Réponses: 4
    Dernier message: 08-07-2011, 11:12

Règles des messages

  • Vous ne pouvez pas créer de sujets
  • Vous ne pouvez pas répondre aux sujets
  • Vous ne pouvez pas importer de fichiers joints
  • Vous ne pouvez pas modifier vos messages
  •  
Nous contacter | DZSat | Archives | Haut de page