bonjour a tous,
est ce que quelqu'un connait la résolution à ce problème, j'explique, je possède un serveur configuré sous ubuntu mais après un certain temps le cccam fait une demande qui n'est pas bonne et se plante, je dois redémarrer le cccam pour que tout refonctionne. ce problème peut survenir une fois par jour comme dix fois par jour, je mets ici les dernières lignes quant il se plante
si quelqu'un peut m'aider ce serait bien

Jun 30 17:45:46 ubuntu CCcam: local ecm -> card /dev/ttyUSB2 0x500(0x24400) sid 0x086
Jun 30 17:45:46 ubuntu CCcam: provider 140c0 not on localcard
Jun 30 18:16:34 ubuntu kernel: [ 0.000000] 0000000000 - 00cf400000 page 2M
Jun 30 18:16:34 ubuntu kernel: [ 0.000000] 00cf400000 - 00cf5e0000 page 4k
Jun 30 18:16:34 ubuntu kernel: [ 0.000000] kernel direct mapping tables up to cf5e0000 @ 10000-16000
Jun 30 18:16:34 ubuntu kernel: [ 0.000000] 0100000000 - 0130000000 page 2M
Jun 30 18:16:34 ubuntu kernel: [ 0.000000] kernel direct mapping tables up to 130000000 @ 14000-1a000
Jun 30 18:16:34 ubuntu kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Jun 30 18:16:34 ubuntu kernel: [ 0.000000] [ffffe20000000000-ffffe200043fffff] PMD -> [ffff880028200000-ffff88002c5fffff] on node 0
Jun 30 18:16:34 ubuntu kernel: [ 0.000000] On node 0 totalpages: 1045861
Jun 30 18:16:34 ubuntu kernel: [ 0.000000] DMA zone: 56 pages used for memmap
Jun 30 18:16:34 ubuntu kernel: [ 0.000000] DMA zone: 2543 pages reserved
Jun 30 18:16:34 ubuntu kernel: [ 0.000000] DMA zone: 1374 pages, LIFO batch:0
Jun 30 18:16:34 ubuntu kernel: [ 0.000000] DMA32 zone: 14280 pages used for memmap
Jun 30 18:16:34 ubuntu kernel: [ 0.000000] DMA32 zone: 831000 pages, LIFO batch:31
Jun 30 18:16:34 ubuntu kernel: [ 0.000000] Normal zone: 2688 pages used for memmap
Jun 30 18:16:34 ubuntu kernel: [ 0.000000] Normal zone: 193920 pages, LIFO batch:31
Jun 30 18:16:34 ubuntu kernel: [ 0.000000] Movable zone: 0 pages used for memmap
Jun 30 18:16:34 ubuntu kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Jun 30 18:16:34 ubuntu kernel: [ 0.000000] ACPI: IRQ0 used by override.
Jun 30 18:16:34 ubuntu kernel: [ 0.000000] ACPI: IRQ2 used by override.
Jun 30 18:16:34 ubuntu kernel: [ 0.000000] ACPI: IRQ9 used by override.
Jun 30 18:16:34 ubuntu kernel: [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
Jun 30 18:16:34 ubuntu kernel: [ 0.010000] Calgary: detecting Calgary via BIOS EBDA area
Jun 30 18:16:34 ubuntu kernel: [ 0.010000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Jun 30 18:16:34 ubuntu kernel: [ 0.010000] hpet clockevent registered
Jun 30 18:16:34 ubuntu kernel: [ 0.480079] CPU0 attaching sched-domain:
Jun 30 18:16:34 ubuntu kernel: [ 0.480081] domain 0: span 0-1 level MC
Jun 30 18:16:34 ubuntu kernel: [ 0.480082] groups: 0 1
Jun 30 18:16:34 ubuntu kernel: [ 0.480086] CPU1 attaching sched-domain:
Jun 30 18:16:34 ubuntu kernel: [ 0.480087] domain 0: span 0-1 level MC
Jun 30 18:16:34 ubuntu kernel: [ 0.480088] groups: 1 0
Jun 30 18:16:34 ubuntu kernel: [ 0.487323] ACPI: EC: Look up EC in DSDT
Jun 30 18:16:34 ubuntu kernel: [ 0.495990] pci 0000:00:02.0: reg 10 32bit mmio: [0xf2100000-0xf217ffff]
Jun 30 18:16:34 ubuntu kernel: [ 0.495993] pci 0000:00:02.0: reg 14 io port: [0xe400-0xe407]
Jun 30 18:16:34 ubuntu kernel: [ 0.495996] pci 0000:00:02.0: reg 18 32bit mmio: [0xe0000000-0xefffffff]
Jun 30 18:16:34 ubuntu kernel: [ 0.495998] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf2000000-0xf20fffff]
Jun 30 18:16:34 ubuntu kernel: [ 0.496047] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf2180000-0xf2183fff]
Jun 30 18:16:34 ubuntu kernel: [ 0.496140] pci 0000:00:1d.0: reg 20 io port: [0xe000-0xe01f]
Jun 30 18:16:34 ubuntu kernel: [ 0.496174] pci 0000:00:1d.1: reg 20 io port: [0xe100-0xe11f]
Jun 30 18:16:34 ubuntu kernel: [ 0.496208] pci 0000:00:1d.2: reg 20 io port: [0xe200-0xe21f]
Jun 30 18:16:34 ubuntu kernel: [ 0.496241] pci 0000:00:1d.3: reg 20 io port: [0xe300-0xe31f]
Jun 30 18:16:34 ubuntu kernel: [ 0.496274] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf2184000-0xf21843ff]
Jun 30 18:16:34 ubuntu kernel: [ 0.496414] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
Jun 30 18:16:34 ubuntu kernel: [ 0.496417] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
Jun 30 18:16:34 ubuntu kernel: [ 0.496421] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
Jun 30 18:16:34 ubuntu kernel: [ 0.496425] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
Jun 30 18:16:34 ubuntu kernel: [ 0.496429] pci 0000:00:1f.2: reg 20 io port: [0xf000-0xf00f]
Jun 30 18:16:34 ubuntu kernel: [ 0.496477] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
Jun 30 18:16:34 ubuntu kernel: [ 0.496521] pci 0000:00:1c.0: bridge io port: [0xc000-0xcfff]
Jun 30 18:16:34 ubuntu kernel: [ 0.496552] pci 0000:02:01.0: reg 10 io port: [0xd000-0xd0ff]
Jun 30 18:16:34 ubuntu kernel: [ 0.496557] pci 0000:02:01.0: reg 14 32bit mmio: [0xf1000000-0xf10000ff]
Jun 30 18:16:34 ubuntu kernel: [ 0.496578] pci 0000:02:01.0: reg 30 32bit mmio: [0x000000-0x00ffff]
Jun 30 18:16:34 ubuntu kernel: [ 0.496585] pci 0000:02:01.0: supports D1 D2
Jun 30 18:16:34 ubuntu kernel: [ 0.496626] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
Jun 30 18:16:34 ubuntu kernel: [ 0.496629] pci 0000:00:1e.0: bridge 32bit mmio: [0xf0000000-0xf1ffffff]
Jun 30 18:16:34 ubuntu kernel: [ 0.496639] bus 00 -> node 0
Jun 30 18:16:34 ubuntu kernel: [ 0.496643] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jun 30 18:16:34 ubuntu kernel: [ 0.496786] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
Jun 30 18:16:34 ubuntu kernel: [ 0.496854] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
Jun 30 18:16:34 ubuntu kernel: [ 0.503718] libata version 3.00 loaded.
Jun 30 18:16:34 ubuntu kernel: [ 0.550005] Switched to high resolution mode on CPU 0
Jun 30 18:16:34 ubuntu kernel: [ 0.550817] Switched to high resolution mode on CPU 1
Jun 30 18:16:34 ubuntu kernel: [ 0.576552] pci 0000:00:1c.0: setting latency timer to 64
Jun 30 18:16:34 ubuntu kernel: [ 0.576556] pci 0000:00:1e.0: setting latency timer to 64
Jun 30 18:16:34 ubuntu kernel: [ 1.129495] pci 0000:00:02.0: Boot video device
Jun 30 18:16:34 ubuntu kernel: [ 1.131193] pcieport-driver 0000:00:1c.0: setting latency timer to 64
Jun 30 18:16:34 ubuntu kernel: [ 1.131239] pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X
Jun 30 18:16:34 ubuntu kernel: [ 1.131247] pci_express 0000:00:1c.0:pcie00: allocate port service
Jun 30 18:16:34 ubuntu kernel: [ 1.131261] pci_express 0000:00:1c.0:pcie02: allocate port service
Jun 30 18:16:34 ubuntu kernel: [ 1.131268] pci_express 0000:00:1c.0:pcie03: allocate port service
Jun 30 18:16:34 ubuntu kernel: [ 1.202511] ata_piix 0000:00:1f.2: version 2.12
Jun 30 18:16:34 ubuntu kernel: [ 1.202550] ata_piix 0000:00:1f.2: setting latency timer to 64
Jun 30 18:16:34 ubuntu kernel: [ 1.650676] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jun 30 18:16:34 ubuntu kernel: [ 1.650746] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jun 30 18:16:34 ubuntu kernel: [ 1.683884] sr 1:0:1:0: Attached scsi CD-ROM sr0
Jun 30 18:16:34 ubuntu kernel: [ 1.684263] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Jun 30 18:16:34 ubuntu kernel: [ 1.688182] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
Jun 30 18:16:34 ubuntu kernel: [ 1.720205] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Jun 30 18:16:34 ubuntu kernel: [ 1.720363] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Jun 30 18:16:34 ubuntu kernel: [ 1.720521] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Jun 30 18:16:34 ubuntu kernel: [ 1.720680] uhci_hcd 0000:00:1d.3: setting latency timer to 64
Jun 30 18:16:34 ubuntu kernel: [ 2.136848] PM: Resume from partition 8:5
Jun 30 18:16:34 ubuntu kernel: [ 2.136849] PM: Checking hibernation image.
Jun 30 18:16:34 ubuntu kernel: [ 2.136978] PM: Resume from disk failed.
Jun 30 18:16:34 ubuntu kernel: [ 4.191972] HDA Intel 0000:00:1b.0: setting latency timer to 64
Jun 30 18:16:35 ubuntu CCcam: ================================================== ====================
Jun 30 18:16:35 ubuntu CCcam: starting CCcam 2.1.1 compiled on Apr 30 2009@23:35:04
Jun 30 18:16:35 ubuntu CCcam: ================================================== ====================
Jun 30 18:16:35 ubuntu CCcam: online using nodeId 5228ada5d06a7448
Jun 30 18:16:35 ubuntu CCcam: create 1 cam device(s)
Jun 30 18:16:36 ubuntu CCcam: card detect fail
Jun 30 18:16:38 ubuntu last message repeated 3 times
Jun 30 18:16:38 ubuntu CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
Jun 30 18:16:38 ubuntu CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
Jun 30 18:16:38 ubuntu CCcam: static cw not found or bad
Jun 30 18:16:38 ubuntu CCcam: parsed 0 entries from /var/keys/CCcam.prio
Jun 30 18:16:38 ubuntu CCcam: added 1288 provider names from /var/etc/CCcam.providers
Jun 30 18:16:38 ubuntu CCcam: added 8297 channel names from /var/etc/CCcam.channelinfo
Jun 30 18:16:38 ubuntu CCcam: server started on port 13000

un grand merci d'avance