Aucune carte SIM n’est installée dans l’iPhone que vous tentez d’activer. aidez moi

[tracasse66]

Aucune carte SIM n’est installée dans l’iPhone que vous tentez d’activer. aidez moi

bonsoir a tous g un iphone 3gs 32GO g voulu le mmetre a jour avec la version 6.3.1 via itunes tous c passeer tres bien mais maintenant il m ecris ca
Aucune carte SIM n’est installée dans l’iPhone que vous tentez d’activer.

Déconnectez l’iPhone et insérez-y une carte SIM.
​

BasebandVersion: 06.15.00

comment faire pour recuperer mon iphone merci

- - - Mise à jour - - -

re bonsoir l equipe aucune reponse j attends toujours votre savoir merci
​

 

[TAGRART]

bonjour

Essaye le downgrade du baseband à l'aide de la derniere version de redsnow.

 

[tracasse66]

merci l ami pour ta reponse mais comment le faire je n y connai rien en iphone merci de m aider

 

[boxdream]

,,,,,,,,,

 

[TAGRART]

Requis :
Redsnow 0.9.15b3:
Mac: https://sites.google.com/a/iphone-de...edirects=0&d=1
Windows: https://sites.google.com/a/iphone-de...edirects=0&d=1


iPhone 3GS 6.0 firmware: iPhone 3GS 6.0 - Downloads - Apple, iPhone and iPad Forums | ModMyi.com




1: Put iPhone into DFU mode by plugging it in and holding home and power button for 10 seconds, then let go of power and keep holding home button for an additional 10 settings.


2: Open redsnow 0.9.15b3, at the bottom it should tell you if you have old or new bootrom, remember this, it is important for step 4.


3: Click on Extras then Select IPSW, a window will open where you should point redsnow to the 6.0 firmware you downloaded (it has to be 6.0, even if you are on 6.1.3).


4: When redsnow ask if you have newer fixed model 3GS answer yes if you have new bootrom or no if you have old bootrom.


5: Press back and select jailbreak. A list will pop up soon asking what you want to do, choose only the option to downgrade baseband, then click next.


6: Sit back and let redsnow to its thing.


7: Once the phone comes back on go into settings/general/about and confirm you have 5.13.04 modem firmware (baseband).


8: Assuming it was successful open iTunes and restore the phone to 6.1.3. Your official unlock should activate after the restore.


IMPORTANT: if you are using redsnow on Windows 7 or Vista Before starting step 1 right-click on the redsnow.exe file and select properties. Click on the compatibility tab and check the boxes under run as admin and run in windows xp compatibility mode. Then you can proceed to open redsnow.