Merci Merci:  0
Likes Likes:  0
Dislikes Dislikes:  0
Affiche les résultats de 1 à 6 sur 6

Sujet : circuit du façade
Le problème de ce sujet a été résolu / Voir les messages utiles


  1. #1
    DZSatien Initié Avatar de brisco1412
    Inscrit
    Jun 2008
    Lieu
    paris
    Âge
    42
    Messages
    854
    Récepteur
    Vu solo2
    TV
    SONY BRAVIA 124cm
    Remerciement / J'aime

    circuit du façade

    bonjour j'ai passer mon morebox a la jtag mais il reconnu pas le cpu il affiche fffffff si ya quelqu'un qui peut me mentrer ou il se trouve le circuit du façade qu'il faut le changer et c'est quoi ces refference merci .
    Vu+Solo2 - Dreambox 800 Se A8P - ATLAS 200se - IPTV - Mgcamd & Cccam servers.
    SONY BRAVIA KD-49X8505B
    Iphone 7plus.



  2. #2
    Nouveau
    Inscrit
    Jan 2010
    Messages
    18
    Remerciement / J'aime
    I think now that it is not changing the front chip but reprogramming it. I changed megawins from receiver el ali c and now morebox writes ASH. (I bought them on bazaar in Odessa with front panels from old moresat ali c receivers in repair shop. It costs kopeks). If u solder new megawin (not programmed at all) even clock and remote will not work. Programmater can be found, but we need bin file special for morebox's megawin. Here is Solution_4Chinois_Morebox_ON_After_Last_Update_17-.04.2011
    or
    http://forum.soirnet.org/showthread....-570-Twin-tune
    It contains some unusual HEX file. I think it is for megawin, maybe not.
    Those who made files can not be found yet.

    (Interface chip = front chip = megawin).)))))))
    Dernière édition par rrr969; 08-05-2011 à 19:52

  3. #3
    DZSatien Initié Avatar de brisco1412
    Inscrit
    Jun 2008
    Lieu
    paris
    Âge
    42
    Messages
    854
    Récepteur
    Vu solo2
    TV
    SONY BRAVIA 124cm
    Remerciement / J'aime
    merci rrr
    Vu+Solo2 - Dreambox 800 Se A8P - ATLAS 200se - IPTV - Mgcamd & Cccam servers.
    SONY BRAVIA KD-49X8505B
    Iphone 7plus.


  4. #4
    Nouveau
    Inscrit
    Jan 2010
    Messages
    18
    Remerciement / J'aime
    "Many of chinois morebox have been intrapted with the last update of 17th ,now the problem is resolved only with the following process :
    1-change the Interface Circuit
    2-Charge The flash memory with the joinded Dump of 15.04.2011
    3-Charge The Eproom With the joined File : Morebox 24C16"

    As u see all of the message makes sense, people know what they are talking about. But №3 is not executable. Eeprom is the flash, the small file will stand there instead of loader (first block). (So what is that HEX file then?).

    If somebody need it, I here post the loader (first block) of the morebox 301d. The process with JTAG is very fast. Put bootloader (bootloader_old_and_good) with JTAG, then - all u need with rs232 and 2.0.0 Upgrade programme.
    First time u "turn on" the morebox after JTAG it goes like this:
    1. goes bootloader (with "head check" - processor compares codes for megawin with actual megawin. It is benign.
    2. goes maincode (with second "head check" - here if the code in megawin is different - flash is erased completely. It is malignant. To find this command was impossible for me.
    There is no second "head check" if u load morebox receiver (not dongle).
    3. Goes CAS block, users tune block, pictures etc.
    All can be edited in HEX editor.
    THE PROBLEM is not in first block or in blocks after maincode, don't lose time, I've lost it, composing different dumps but with new maincode (and with slightly changed maincode).
    Force be with you.)))
    Dernière édition par rrr969; 09-05-2011 à 11:40

  5. #5
    Nouveau
    Inscrit
    Jan 2010
    Messages
    18
    Remerciement / J'aime
    Now I see.
    24C16 is the adress in maincode, I think it should be changed with HEX editor. Oh, my! Unfortunately I can not try it these days, I'm not in my flat.
    Dernière édition par rrr969; 09-05-2011 à 12:02

  6. #6
    DZSatien Initié Avatar de brisco1412
    Inscrit
    Jun 2008
    Lieu
    paris
    Âge
    42
    Messages
    854
    Récepteur
    Vu solo2
    TV
    SONY BRAVIA 124cm
    Remerciement / J'aime
    excuse moi rrr mais je suis un peut nulle en anglais et merci encor .
    Vu+Solo2 - Dreambox 800 Se A8P - ATLAS 200se - IPTV - Mgcamd & Cccam servers.
    SONY BRAVIA KD-49X8505B
    Iphone 7plus.


Sujets similaires

  1. court circuit LNB
    Par milamber dans le forum Entraide Starsat
    Réponses: 3
    Dernier message: 05-09-2008, 12:44

Règles des messages

  • Vous ne pouvez pas créer de sujets
  • Vous ne pouvez pas répondre aux sujets
  • Vous ne pouvez pas importer de fichiers joints
  • Vous ne pouvez pas modifier vos messages
  •  
Nous contacter | DZSat | Archives | Haut de page