Bonjour,
j'ai placé un disque dur 250go dans ma dreambox 800hd, il est bien reconnu dans la dreambox, cependant, je ne parviens pas à le formater correctement, car il n'ya pas de partition valide,
qui pourrait m'aider?
merci d'avance
Pour info: j'ai une image gemini, le disque dur est reconnu dans le blue panel et j'ai possibilité de l'umount, mais impossible de le formater pour le mount par la suite, toutes les commandes par telnet semblent ne pas répondre
le message indiquait lors du formatage:
"warning:no primary partition is marked bootable (active)
this does not matter for LIL0, but the DOS MBR will not boot this disk.
Successfully wrote the new partition table
re-reading the partition table
if you created or changed a dos partition, /dev/foo7, say , then use dd (1)
to zerp the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1
(see fdisk(8).)
mke2fs 1.41.9 (22-aug-2009)
execution terminée
MERCI d'avance pour votre aide
j'ai placé un disque dur 250go dans ma dreambox 800hd, il est bien reconnu dans la dreambox, cependant, je ne parviens pas à le formater correctement, car il n'ya pas de partition valide,
qui pourrait m'aider?
merci d'avance
Pour info: j'ai une image gemini, le disque dur est reconnu dans le blue panel et j'ai possibilité de l'umount, mais impossible de le formater pour le mount par la suite, toutes les commandes par telnet semblent ne pas répondre
le message indiquait lors du formatage:
"warning:no primary partition is marked bootable (active)
this does not matter for LIL0, but the DOS MBR will not boot this disk.
Successfully wrote the new partition table
re-reading the partition table
if you created or changed a dos partition, /dev/foo7, say , then use dd (1)
to zerp the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1
(see fdisk(8).)
mke2fs 1.41.9 (22-aug-2009)
execution terminée
MERCI d'avance pour votre aide