Merci Merci:  0
Likes Likes:  0
Dislikes Dislikes:  0
Affiche les résultats de 1 à 4 sur 4

Sujet : problem DM800 pvr bloqué sur dream multimédia
Le problème de ce sujet a été résolu / Voir les messages utiles


  1. #1
    DZSatien Confirmé
    Inscrit
    May 2009
    Messages
    53
    Récepteur
    800hd 500s
    TV
    samsung 22"
    Remerciement / J'aime

    problem DM800 pvr bloqué sur dream multimédia

    salem all

    j'ai une dream 800 hd pvr tuner hig 003 rev:k bloque au démarrage sur dream multimédia

    mais qd j’enlève le tuner la dream démarre et j'ai fait un test avec hyper terminal et voila le test avec et son tuner

    test sans tuner :

    (c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
    Dreambox DM800
    FIRST STAGE 1.00 {BO23456}

    2ND STAGE OK, build #84 (2011-09-02)

    0.000 - BCM board setup
    {00000126,00000126,00000125,00000124,00000133,0000 0133}
    0.007 - fp init
    0.008 - ca init
    1.095 - load config

    (c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
    Dreambox DM800
    FIRST STAGE 1.00 {BO23456}

    2ND STAGE OK, build #84 (2011-09-02)

    0.000 - BCM board setup
    {00000126,00000126,00000125,00000124,00000133,0000 0133}
    0.007 - fp init
    0.008 - ca init
    1.096 - load config
    dCA: version mismatch, loading defaults
    1.127 - config loaded.
    * press [S] to enter setup
    OLED found!
    lcd: BOOT #84B
    - read config file: /boot/secondstage.conf
    detected jffs2 blocksize: 16kb
    ++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++
    ++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++
    +++++++++++++++++UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU UUUUUUUUUUUUU
    UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU U
    dreamupd initialized
    Scanning JFFS2 FS: . done.
    find_inode failed for name=secondstage.conf
    load: Failed to find inode
    - failed to open /boot/secondstage.conf
    - failed to open /cf/autorun.bat
    lcd: /flash/bootlogo.elf
    bootlogo size: 280045
    no HDMI device detected
    no HDMI mode available, reverting to 720p
    using 1280x720p (60.00 Hz)
    HDMI
    using colorspace: 0
    create surface 1280 720
    Using the Small jpeg decoder library, Copyright (c) 2006, Luc Saillard <luc@sail
    lard.org>
    parsing JPEG header..
    Virtual FB Size: 1280x720
    lcd: /flash/vmlinux.gz
    <5>Linux version 2.6.18-7.4-dm800 (ghost@rabbit) (gcc version 4.4.3 (GCC) ) #1 T
    ue Mar 27 12:15:44 UTC 2012
    Fetching vars from bootloader... none present, using defaults.
    board_init_once: regval=44ac6502, ddr_strap=3, 4 chips, pci_size=2
    Detected 256 MB on board
    <4>WARNING: read invalid MAC address ff:ff:ff:ff:ff:ff from flash @ 0xbffff824
    Default command line =
    root=/dev/mtdblock3 rootfstype=jffs2 rw console=null
    1 831ffebc 83029b34
    g_board_RAM_size=256MB
    Options: sata=1 enet=1 emac_1=0 no_mdio=0 docsis=0 ebi_war=0 pci=1 smp=0
    CPU revision is: 00020000
    Determined physical RAM map:
    memory: 10000000 @ 00000000 (usable)
    ---> memsize from bootloader: 148
    User-defined physical RAM map:
    node [00000000, 09400000: RAM]
    node [09400000, 06c00000: RSVD]
    <5>Reserving 108 MB upper memory starting at 09400000
    <7>On node 0 totalpages: 65536
    <7> DMA zone: 65536 pages, LIFO batch:15
    Built 1 zonelists. Total pages: 65536
    <5>Kernel command line: root=/dev/mtdblock3 rootfstype=jffs2 rw console=null
    before init RAC 0x02a00000 0x00000000
    after init RAC 0x02a0000f 0x0fff0000

    (c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
    Dreambox DM800
    FIRST STAGE 1.00 {BO23456}

    2ND STAGE OK, build #70 (20081211)

    0.000 - BCM board setup
    0.022 - fp init
    0.023 - ca init
    0.367 - load config

    (c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
    Dreambox DM800
    FIRST STAGE 1.00 {BO23456}

    2ND STAGE OK, build #70 (20081211)

    0.000 - BCM board setup
    0.022 - fp init
    0.023 - ca init
    0.367 - load config
    dCA: version mismatch, loading defaults
    0.398 - config loaded.
    * press [S] to enter setup
    OLED found!
    BOOT #70(20081211)
    detected jffs2 blocksize: 16kb
    ++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++
    ++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++
    ++++++++++++++++++++++++UUUUUUUUUUUUUUUUUUUUUUUUUU UUUUUUUUUUUUU
    UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU U
    dreamupd initialized
    Scanning JFFS2 FS: . done.
    /flash/bootlogo.elf
    bootlogo size: 195531
    using 1280x720p (60.00 Hz)
    Using the Small jpeg decoder library, Copyright (c) 2006, Luc Saillard <luc@sail
    lard.org>
    parsing JPEG header..
    JPEG Size: 1280x720
    /flash/vmlinux.gz
    <5>Linux version 2.6.18-7.3-dm800 (tux@debian) (gcc version 4.4.3 (GCC) ) #1 Wed
    Jul 21 17:43:45 CEST 2010
    Fetching vars from bootloader... none present, using defaults.
    board_init_once: regval=44ac6502, ddr_strap=3, 4 chips, pci_size=2
    Detected 256 MB on board
    <4>WARNING: read invalid MAC address ff:ff:ff:ff:ff:ff from flash @ 0xbffff824
    Default command line =
    root=/dev/mtdblock3 rootfstype=jffs2 rw console=null
    1 831ffee0 8303ac88
    g_board_RAM_size=256MB
    Options: sata=1 enet=1 emac_1=0 no_mdio=0 docsis=0 ebi_war=0 pci=1 smp=0
    CPU revision is: 00020000
    Determined physical RAM map:
    memory: 10000000 @ 00000000 (usable)
    ---> memsize from bootloader: 128
    User-defined physical RAM map:
    node [00000000, 08000000: RAM]
    node [08000000, 08000000: RSVD]
    <5>Reserving 128 MB upper memory starting at 08000000
    <7>On node 0 totalpages: 65536
    <7> DMA zone: 65536 pages, LIFO batch:15
    Built 1 zonelists. Total pages: 65536
    <5>Kernel command line: root=/dev/mtdblock3 rootfstype=jffs2 rw console=null
    before init RAC 0x02a00000 0x00000000
    after init RAC 0x02a0000f 0x0fff0000

    (c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
    Dreambox DM800
    FIRST STAGE 1.00 {BO23456}

    2ND STAGE OK, build #70 (20081211)

    0.000 - BCM board setup
    0.022 - fp init
    0.023 - ca init
    0.367 - load config
    dCA: version mismatch, loading defaults
    0.398 - config loaded.
    * press [S] to enter setup
    OLED found!
    BOOT #70(20081211)
    detected jffs2 blocksize: 16kb
    ++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++
    ++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++
    ++++++++++++++++++++++++UUUUUUUUUUUUUUUUUUUUUUUUUU UUUUUUUUUUUUU
    UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU U
    dreamupd initialized
    Scanning JFFS2 FS: . done.
    /flash/bootlogo.elf
    bootlogo size: 195531
    using 1280x720p (60.00 Hz)
    Using the Small jpeg decoder library, Copyright (c) 2006, Luc Saillard <luc@sail
    lard.org>
    parsing JPEG header..
    JPEG Size: 1280x720
    /flash/vmlinux.gz
    <5>Linux version 2.6.18-7.3-dm800 (tux@debian) (gcc version 4.4.3 (GCC) ) #1 Wed
    Jul 21 17:43:45 CEST 2010
    Fetching vars from bootloader... none present, using defaults.
    board_init_once: regval=44ac6502, ddr_strap=3, 4 chips, pci_size=2
    Detected 256 MB on board
    <4>WARNING: read invalid MAC address ff:ff:ff:ff:ff:ff from flash @ 0xbffff824
    Default command line =
    root=/dev/mtdblock3 rootfstype=jffs2 rw console=null
    1 831ffee0 8303ac88
    g_board_RAM_size=256MB
    Options: sata=1 enet=1 emac_1=0 no_mdio=0 docsis=0 ebi_war=0 pci=1 smp=0
    CPU revision is: 00020000
    Determined physical RAM map:
    memory: 10000000 @ 00000000 (usable)
    ---> memsize from bootloader: 128
    User-defined physical RAM map:
    node [00000000, 08000000: RAM]
    node [08000000, 08000000: RSVD]
    <5>Reserving 128 MB upper memory starting at 08000000
    <7>On node 0 totalpages: 65536
    <7> DMA zone: 65536 pages, LIFO batch:15
    Built 1 zonelists. Total pages: 65536
    <5>Kernel command line: root=/dev/mtdblock3 rootfstype=jffs2 rw console=null
    before init RAC 0x02a00000 0x00000000
    after init RAC 0x02a0000f 0x0fff0000


    test avec tuner :


    (c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
    Dreambox DM800
    FIRST STAGE 1.00 {BO23456}

    2ND STAGE OK, build #70 (20081211)

    0.000 - BCM board setup
    0.022 - fp init
    0.023 - ca init
    0.367 - load config

    le test rest bloqué sur load config , aidé moi svp

    - - - Mise à jour - - -

    alors un aide svp

    - - - Mise à jour - - -

    un aide svp

    - - - Mise à jour - - -

    alors personne peut m’aide


  2. #2
    Nouveau
    Inscrit
    Apr 2008
    Âge
    40
    Messages
    15
    Récepteur
    atlas 200HD
    TV
    samsung led 55"
    Remerciement / J'aime
    Salem,
    En ce moment, j'ai le meme pb que toi sur ma dream.Elle reste bloqué sur /falsh/vmlinux.gz pour l'instant je n'ai pas de cable RS232 pour visualiser les logs et pas trouver comment démonter le tunner pour faire un test sans tunner.

    Et toi as tu réussi a réparer ta dream, il te suffit peut etre de changer le tunner non ?

    Par avance, merci de ta réponse.

  3. #3
    DZSatien Habitué
    Inscrit
    Feb 2008
    Âge
    42
    Messages
    109
    Récepteur
    Dm800se
    TV
    Samsung LCD
    Remerciement / J'aime

    Dreambox 500hd

    Bonjour
    je viens d'acheter un Dreambox 500hd , et je voulais savoir comment on peut le flasher
    et avec quel image , je suis débutant merci de me répondre mes frère

  4. #4
    V.I.P Avatar de PXXX2003
    Inscrit
    Apr 2008
    Messages
    712
    Récepteur
    DREAMBOX
    TV
    SAMSUNG
    Remerciement / J'aime
    Citation Envoyé par kader2006 Voir le message
    salem all

    j'ai une dream 800 hd pvr tuner hig 003 rev:k bloque au démarrage sur dream multimédia

    mais qd j’enlève le tuner la dream démarre et j'ai fait un test avec hyper terminal et voila le test avec et son tuner

    test sans tuner :

    (c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
    Dreambox DM800
    FIRST STAGE 1.00 {BO23456}

    2ND STAGE OK, build #84 (2011-09-02)

    0.000 - BCM board setup
    {00000126,00000126,00000125,00000124,00000133,0000 0133}
    0.007 - fp init
    0.008 - ca init
    1.095 - load config

    (c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
    Dreambox DM800
    FIRST STAGE 1.00 {BO23456}

    2ND STAGE OK, build #84 (2011-09-02)

    0.000 - BCM board setup
    {00000126,00000126,00000125,00000124,00000133,0000 0133}
    0.007 - fp init
    0.008 - ca init
    1.096 - load config
    dCA: version mismatch, loading defaults
    1.127 - config loaded.
    * press [S] to enter setup
    OLED found!
    lcd: BOOT #84B
    - read config file: /boot/secondstage.conf
    detected jffs2 blocksize: 16kb
    ++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++
    ++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++
    +++++++++++++++++UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU UUUUUUUUUUUUU
    UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU U
    dreamupd initialized
    Scanning JFFS2 FS: . done.
    find_inode failed for name=secondstage.conf
    load: Failed to find inode
    - failed to open /boot/secondstage.conf
    - failed to open /cf/autorun.bat
    lcd: /flash/bootlogo.elf
    bootlogo size: 280045
    no HDMI device detected
    no HDMI mode available, reverting to 720p
    using 1280x720p (60.00 Hz)
    HDMI
    using colorspace: 0
    create surface 1280 720
    Using the Small jpeg decoder library, Copyright (c) 2006, Luc Saillard <luc@sail
    lard.org>
    parsing JPEG header..
    Virtual FB Size: 1280x720
    lcd: /flash/vmlinux.gz
    <5>Linux version 2.6.18-7.4-dm800 (ghost@rabbit) (gcc version 4.4.3 (GCC) ) #1 T
    ue Mar 27 12:15:44 UTC 2012
    Fetching vars from bootloader... none present, using defaults.
    board_init_once: regval=44ac6502, ddr_strap=3, 4 chips, pci_size=2
    Detected 256 MB on board
    <4>WARNING: read invalid MAC address ff:ff:ff:ff:ff:ff from flash @ 0xbffff824
    Default command line =
    root=/dev/mtdblock3 rootfstype=jffs2 rw console=null
    1 831ffebc 83029b34
    g_board_RAM_size=256MB
    Options: sata=1 enet=1 emac_1=0 no_mdio=0 docsis=0 ebi_war=0 pci=1 smp=0
    CPU revision is: 00020000
    Determined physical RAM map:
    memory: 10000000 @ 00000000 (usable)
    ---> memsize from bootloader: 148
    User-defined physical RAM map:
    node [00000000, 09400000: RAM]
    node [09400000, 06c00000: RSVD]
    <5>Reserving 108 MB upper memory starting at 09400000
    <7>On node 0 totalpages: 65536
    <7> DMA zone: 65536 pages, LIFO batch:15
    Built 1 zonelists. Total pages: 65536
    <5>Kernel command line: root=/dev/mtdblock3 rootfstype=jffs2 rw console=null
    before init RAC 0x02a00000 0x00000000
    after init RAC 0x02a0000f 0x0fff0000

    (c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
    Dreambox DM800
    FIRST STAGE 1.00 {BO23456}

    2ND STAGE OK, build #70 (20081211)

    0.000 - BCM board setup
    0.022 - fp init
    0.023 - ca init
    0.367 - load config

    (c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
    Dreambox DM800
    FIRST STAGE 1.00 {BO23456}

    2ND STAGE OK, build #70 (20081211)

    0.000 - BCM board setup
    0.022 - fp init
    0.023 - ca init
    0.367 - load config
    dCA: version mismatch, loading defaults
    0.398 - config loaded.
    * press [S] to enter setup
    OLED found!
    BOOT #70(20081211)
    detected jffs2 blocksize: 16kb
    ++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++
    ++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++
    ++++++++++++++++++++++++UUUUUUUUUUUUUUUUUUUUUUUUUU UUUUUUUUUUUUU
    UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU U
    dreamupd initialized
    Scanning JFFS2 FS: . done.
    /flash/bootlogo.elf
    bootlogo size: 195531
    using 1280x720p (60.00 Hz)
    Using the Small jpeg decoder library, Copyright (c) 2006, Luc Saillard <luc@sail
    lard.org>
    parsing JPEG header..
    JPEG Size: 1280x720
    /flash/vmlinux.gz
    <5>Linux version 2.6.18-7.3-dm800 (tux@debian) (gcc version 4.4.3 (GCC) ) #1 Wed
    Jul 21 17:43:45 CEST 2010
    Fetching vars from bootloader... none present, using defaults.
    board_init_once: regval=44ac6502, ddr_strap=3, 4 chips, pci_size=2
    Detected 256 MB on board
    <4>WARNING: read invalid MAC address ff:ff:ff:ff:ff:ff from flash @ 0xbffff824
    Default command line =
    root=/dev/mtdblock3 rootfstype=jffs2 rw console=null
    1 831ffee0 8303ac88
    g_board_RAM_size=256MB
    Options: sata=1 enet=1 emac_1=0 no_mdio=0 docsis=0 ebi_war=0 pci=1 smp=0
    CPU revision is: 00020000
    Determined physical RAM map:
    memory: 10000000 @ 00000000 (usable)
    ---> memsize from bootloader: 128
    User-defined physical RAM map:
    node [00000000, 08000000: RAM]
    node [08000000, 08000000: RSVD]
    <5>Reserving 128 MB upper memory starting at 08000000
    <7>On node 0 totalpages: 65536
    <7> DMA zone: 65536 pages, LIFO batch:15
    Built 1 zonelists. Total pages: 65536
    <5>Kernel command line: root=/dev/mtdblock3 rootfstype=jffs2 rw console=null
    before init RAC 0x02a00000 0x00000000
    after init RAC 0x02a0000f 0x0fff0000

    (c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
    Dreambox DM800
    FIRST STAGE 1.00 {BO23456}

    2ND STAGE OK, build #70 (20081211)

    0.000 - BCM board setup
    0.022 - fp init
    0.023 - ca init
    0.367 - load config
    dCA: version mismatch, loading defaults
    0.398 - config loaded.
    * press [S] to enter setup
    OLED found!
    BOOT #70(20081211)
    detected jffs2 blocksize: 16kb
    ++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++
    ++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++
    ++++++++++++++++++++++++UUUUUUUUUUUUUUUUUUUUUUUUUU UUUUUUUUUUUUU
    UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU U
    dreamupd initialized
    Scanning JFFS2 FS: . done.
    /flash/bootlogo.elf
    bootlogo size: 195531
    using 1280x720p (60.00 Hz)
    Using the Small jpeg decoder library, Copyright (c) 2006, Luc Saillard <luc@sail
    lard.org>
    parsing JPEG header..
    JPEG Size: 1280x720
    /flash/vmlinux.gz
    <5>Linux version 2.6.18-7.3-dm800 (tux@debian) (gcc version 4.4.3 (GCC) ) #1 Wed
    Jul 21 17:43:45 CEST 2010
    Fetching vars from bootloader... none present, using defaults.
    board_init_once: regval=44ac6502, ddr_strap=3, 4 chips, pci_size=2
    Detected 256 MB on board
    <4>WARNING: read invalid MAC address ff:ff:ff:ff:ff:ff from flash @ 0xbffff824
    Default command line =
    root=/dev/mtdblock3 rootfstype=jffs2 rw console=null
    1 831ffee0 8303ac88
    g_board_RAM_size=256MB
    Options: sata=1 enet=1 emac_1=0 no_mdio=0 docsis=0 ebi_war=0 pci=1 smp=0
    CPU revision is: 00020000
    Determined physical RAM map:
    memory: 10000000 @ 00000000 (usable)
    ---> memsize from bootloader: 128
    User-defined physical RAM map:
    node [00000000, 08000000: RAM]
    node [08000000, 08000000: RSVD]
    <5>Reserving 128 MB upper memory starting at 08000000
    <7>On node 0 totalpages: 65536
    <7> DMA zone: 65536 pages, LIFO batch:15
    Built 1 zonelists. Total pages: 65536
    <5>Kernel command line: root=/dev/mtdblock3 rootfstype=jffs2 rw console=null
    before init RAC 0x02a00000 0x00000000
    after init RAC 0x02a0000f 0x0fff0000


    test avec tuner :


    (c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
    Dreambox DM800
    FIRST STAGE 1.00 {BO23456}

    2ND STAGE OK, build #70 (20081211)

    0.000 - BCM board setup
    0.022 - fp init
    0.023 - ca init
    0.367 - load config

    le test rest bloqué sur load config , aidé moi svp

    - - - Mise à jour - - -

    alors un aide svp

    - - - Mise à jour - - -

    un aide svp

    - - - Mise à jour - - -

    alors personne peut m’aide
    PXXX2003

    Salut,

    Apparament ton bootloader est 70 soit tu as une sim 1 ou ton boot est coromput et tu pourat mettre que des image avec boot au plus 72
    Quelle image tu avait au debut?
    Sinon tu la reflash

    @++

    PXXX2003


Sujets similaires

  1. Réponses: 3
    Dernier message: 05-04-2016, 18:39
  2. Réponses: 0
    Dernier message: 31-12-2011, 19:42
  3. Dm800 bloquer sur dream multimedia
    Par Kefti dans le forum Entraide E2
    Réponses: 1
    Dernier message: 02-06-2011, 23:36
  4. Dream multimedia -- error -- dm800 ??
    Par yoann dans le forum Discussions Générales
    Réponses: 3
    Dernier message: 01-02-2011, 18:21
  5. dm800 hd pvr dream multimedia error
    Par flo-edouard dans le forum Entraide E2
    Réponses: 14
    Dernier message: 19-08-2010, 00:50

Règles des messages

  • Vous ne pouvez pas créer de sujets
  • Vous ne pouvez pas répondre aux sujets
  • Vous ne pouvez pas importer de fichiers joints
  • Vous ne pouvez pas modifier vos messages
  •  
Nous contacter | DZSat | Archives | Haut de page