Merci Merci:  0
Likes Likes:  0
Dislikes Dislikes:  0
Affiche les résultats de 1 à 6 sur 6

Sujet : configuration cccam.cfg


  1. #1
    DZSatien Habitué
    Inscrit
    Aug 2012
    Lieu
    FRANCE
    Âge
    40
    Messages
    179
    Récepteur
    pinacle 9100HD
    TV
    samsung
    Remerciement / J'aime

    configuration cccam.cfg

    bonjour tous le monde
    alors voila, un petit probleme je voulais savoir si ma configuration de ma cccam.cfg est bonne
    voici telle qu elle est,je n y connait rien , j ai une dreambox 500 S
    merci d avance pour votre aide

    ################################################## ####################
    # Other config settings #
    ################################################## ####################
    #SERVER LISTEN PORT : 12500
    #TELNETINFO LISTEN PORT : 15000
    #WEBINFO LISTEN PORT : 15001
    #NEWCAMD CONF :no
    #DISABLE EMM : no
    #EXTRA EMM LEVEL : yes
    #WEBINFO USERNAME : root
    #WEBINFO PASSWORD : dreambox
    #TELNETINFO USERNAME : root
    #TELNETINFO PASSWORD : dreambox
    #DEBUG : yes
    #N: 127.0.0.1 38000 toto charly 02 02 03 02 05 02 07 08 09 10 11 12 13 14
    #N: 127.0.0.1 38001 toto charly 02 02 03 02 05 02 07 08 09 10 11 12 13 14
    #N: 127.0.0.1 34000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
    #N: 127.0.0.1 34001 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
    SERVER LISTEN PORT : 12500
    WEBINFO USERNAME : root
    WEBINFO PASSWORD : dreambox
    TELNETINFO USERNAME : root
    TELNETINFO PASSWORD : dreambox
    TELNETINFO LISTEN PORT : 15000
    WEBINFO LISTEN PORT : 15001
    ZAP OSD TIME : 3
    OSD USERNAME : root
    OSD PASSWORD : dreambox
    OSD PORT : 80
    SHOW TIMING : yes
    MINI OSD : yes
    DEBUG : yes
    NEWCAMD CONF : no
    #DISABLE EMM : yes
    #EXTRA EMM LEVEL : yes
    #SOFTKEY FILE : /var/keys/SoftCam.Key
    #AUTOROLL FILE : /var/keys/AutoRoll.Key
    #STATIC CW FILE : /var/keys/constant.cw
    #CAID PRIO FILE : /var/etc/CCcam.prio
    PROVIDERINFO FILE : /var/etc/CCcam.providers
    CHANNELINFO FILE : /var/etc/CCcam.channelinfo
    MINIMUM CLIENT VERSION : 1.7.0
    #MINIMUM DOWNHOPS: 1
    N: 127.0.0.1 10001 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
    #C: macline.nomdedomaine.com 18000 PSEUDO MDP

    # overrule the irdeto camkey (8 byte hex), default 11 22 33 44 55 66 77 88
    #
    # CAMKEY: <device> <byte1> <byte2> <byte3> <byte4> <byte5> <byte6> <byte7> <byte8>
    #
    #example
    #
    #CAMKEY: /dev/sci0 11 22 33 44 55 66 77 88
    # overrule the irdeto camdata (64 byte hex)
    # trailing zero bytes can be omitted
    # default for unknown ASC's is 11 22 33 44 55 66 77 88 00 00 .. 00, known ASC's have other defaults
    #
    # CAMDATA: <device> <byte1> <byte2> <byte3> <byte4> <byte5> <byte6> ... <byte64>
    #
    #example, when only the first 15 camdata bytes are nonzero
    #
    #CAMDATA: /dev/sci0 11 22 33 44 55 66 77 88 99 aa bb cc dd ee ff
    # custom add id's for BEEF patched cards
    #
    # BEEF ID: <ident1> <ident2> <ident3> <ident4> <ident5> <ident6> <ident7> <ident8> <device>
    #
    #example
    #
    #BEEF ID: 4101 0 0 0 0 0 0 0 /dev/sci0
    # what Softcam.Key should CCcam try to read
    # defaults to /var/keys/SoftCam.Key
    #
    #SOFTKEY FILE : /var/keys/SoftCam.Key

    # what AutoRoll.Key should CCcam try to read
    # defaults to /var/keys/AutoRoll.Key
    #
    #AUTOROLL FILE : /var/keys/AutoRoll.Key

    # what constant.cw should CCcam try to read
    # defaults to /var/keys/constant.cw
    # file content can be like
    #
    # ca4:id6:sid4:pmtpid4:ecmpid4:key16(01 02 03...)
    #
    #STATIC CW FILE : /var/keys/constant.cw

    # in this file you can configure what CAIDs CCcam should prefer or ignore
    # defaults to /var/etc/CCcam.prio
    # file content can have ignores (I) and prio lists (P)
    #
    # note 1: I line affects both for ecm and emm (receive no emm on ignored systems)
    # P line only affects ecm choice (emm still received for all available systems, not just the priority system)
    #
    # note 2: ident 0 means 'all idents'. So 'caid:0' is the same as 'caid'.
    #
    # note 3: for some systems (e.g. nagra (caid 18xx)), the ident is not known at the time the
    # prio lists are checked. In that case, matching is done on caid only, even if the P line
    # defines nonzero idents. So for example '1801:401' behaves the same as '1801' in a P line
    # I lines work differently, they are checked two times, once before ecm or emm is received, again
    # after ecm or emm are received (and nagra ident should be known)
    # P lines are only checked once, before ecm received.
    #
    # note 4: if a P line contains caid:ident pairs which are not available for the current
    # channel, that P line is not used for that channel.
    # Example, channel has systems 626, 1801:401 then P line with "1801,100:96,626" is ignored by that channel,
    # because channel doesn't have 100:96.
    # But P line with "1801" works, and also "626,1801" will work for channel
    #
    # note 5: P lines are parsed in the order in which they are found in the prio file.
    # Only the first matching P line is used
    #
    # situation 1: ignore allways this caid, all idents, on all channels
    # I: caid
    #
    # situation 2: ignore allways this caid/ident pair
    # I: caid:ident
    #
    # situation 3: ignore this caid/ident pair, on channel 'sid'
    # I: caid:ident:sid
    #
    # situation 4: when both caid1 and caid2 exist for a channel, prefer caid1 over caid2
    # P: caid1, caid2
    #
    # situation 5: when caid1:ident1 till caidN:identN exist for a channel, use them in order of this list.
    # P: caid1:ident1, caid2:ident2, .., caidN:identN
    #
    # situation 6: when caid1:ident1 till caidN:identN exist for channel 'sid', use them in order of this list.
    # Sid on first caid/ident pair identifies sid for which list is used. All other sids ignore this list.
    # P: caid1:ident1:sid, caid2:ident2, .., caidN:identN
    #
    #CAID PRIO FILE : /var/etc/CCcam.prio
    #
    # In this file all provider idents are defined
    # The info from this file is being used in the web interface
    # format:
    # <caid><ident> "Provider description"
    #
    # PROVIDERINFO FILE : /var/etc/CCcam.providers
    #
    # In this file all channel idents are defined
    # The info from this file is being used in the web interface
    # format:
    # caid:ident:sid "Channel description"
    #
    # CHANNELINFO FILE : /var/etc/CCcam.channelinfo
    # write wrong logins to file
    # defaults is off
    #
    #LOG WARNINGS : /tmp/warnings.txt
    # global setting for stealthy login to newcamd/newcs server, N line can overrule
    # stealth modes: 0 = disabled, 1 = mgcamd new, 2 = mgcamd old, 3 = evocamd, 4 = generic
    # default: 0
    #
    #NEWCAMD STEALTH : 0
    # load balancing between identical cards, list device names of card readers containing identical cards,
    # optionally followed by a list of service id's which are to be excluded from loadbalancing
    #
    # LOADBALANCE : <device1> <device2> .. <devicen> { <exceptsid1>, <exceptsid2> .. , <exceptsidn> }
    #
    # multiple loadbalance groups can be configured, by adding multiple lines
    # warning: restart is required, when loadbalance group config changes
    #
    #example 1: load balance requests for three identical cards
    #
    # LOADBALANCE : /dev/ttyS0 /dev/ttyS1 /dev/ttyS2
    #
    #example 2: load balance requests for two almost identical cards, sid 0df3 and 0de1 are only available
    #on one of the cards, so requests for these sids shouldn't be loadbalanced
    #
    # LOADBALANCE : /dev/ttyS5 /dev/ttyS6 { 0df3,0de1 }
    # in version 1.2.1 and lower there was a problem which could lead to disconnecting clients
    # in version 1.4.0 network load was significantly reduced
    # in version 1.7.0 dangerous password bug was fixed
    # in order to take advantage of these fixes, all clients should upgrade
    # with this setting you can force that clients at least use a certain version otherwise they are denied when logging in
    #
    # default : accept all versions
    #
    #example 1: avoid disconnecting clients problem
    #
    #MINIMUM CLIENT VERSION : 1.3.0
    #
    #example 2: achieve network load decrease
    #
    #MINIMUM CLIENT VERSION : 1.4.0
    #
    #example 3: don't allow potentially wrong passwords (pre 1.7.0 has password bug)
    #
    #MINIMUM CLIENT VERSION : 1.7.0

    # Irdeto smartcards: option to disable smart chid checking for irdeto smartcards.
    # Default, only chids advertised by card are accepted.
    # This avoids a lot of unwanted card traffic
    #
    # But if smartcard has hidden/unknown chids, all chids should be tried.
    # In that case specify 'TRY ALL CHIDS' option for cardreader.
    # Use with care, enabling option causes more card traffic.
    # Only use setting when some channels don't work without it.
    # note: if even this setting don't help decode all channels, try using
    # commandline arg -l, to disable all self-learning features (warning: slower)
    #
    #TRY ALL CHIDS : <device>
    #
    #example: card in /dev/ttyUSB0 gets ecm for all possible chids, not
    #just the chids it officially supports
    #
    #TRY ALL CHIDS : /dev/ttyUSB0
    # perform smartcard post init commands
    #
    # POSTINIT : <device> <filename> (<autodelete>)
    #
    # send commands in 'filename' to 'device', and delete 'filename' when
    # optional 'autodelete' argument nonzero
    #
    #example:
    #
    #POSTINIT : /dev/sci0 /tmp/postinit
    #
    #example /tmp/postinit contents:
    #c134000003000000
    #c13201000a
    # Option to override autodetected dvb api version. Restart needed.
    #
    #DVB API: <value>
    #
    # <value> <1 = no dvb, 1 = dvb api 1, 3 = dvb api 3>
    #
    # WARNING: only use when autodetect fails!
    #
    #example, disable nonworking dvb hardware:
    #DVB API: -1
    # Option to set global share limits
    #
    #GLOBAL LIMITS: { caid:id(:downhops), caid:id(:downhops), ... }
    #
    #example:
    #
    #GLOBAL LIMITS : { 0100:000080, 0622:000000:1, 0500:000000:2 }
    #
    # all users get no 0100:000080.
    # and our 0622:000000 cards only for themself (1 hop down),
    # and 0500 cards for themself plus one additional hop down.
    # global limits are overridden by client specific limits (see F:)
    # Option to reject shares with less than required downhops on clientside
    #
    #MINIMUM DOWNHOPS: <value>
    #
    # default: 0 (don't ignore any shares)
    #
    #example:
    #
    #MINIMUM DOWNHOPS: 1
    #
    # ingore shares that have less than 1 'downhops' (i.e. can not be shared
    # further down to other clients)


  2. #2
    DZSatien Initié Avatar de robocop591
    Inscrit
    Jan 2010
    Lieu
    NORD
    Âge
    52
    Messages
    2 099
    Récepteur
    2 dm800+2 atlas
    TV
    LG 140cm
    Remerciement / J'aime
    slt

    ca dépend, tu veux échanger ou juste client?

    a+
    2 Dream800hd clone oscam
    1pc fixe ubuntu x64 + serveur oscam
    1 atlas HD200-boot et firm a jour-
    1 VPS 2 multics r82 - r80 et oscam
    L'intelligence c'est comme le parachute, quand on n'en a pas on s'écrase....

  3. #3
    DZSatien Habitué
    Inscrit
    Aug 2012
    Lieu
    FRANCE
    Âge
    40
    Messages
    179
    Récepteur
    pinacle 9100HD
    TV
    samsung
    Remerciement / J'aime
    bonjour
    je veux échanger
    merci

  4. #4
    DZSatien Initié Avatar de robocop591
    Inscrit
    Jan 2010
    Lieu
    NORD
    Âge
    52
    Messages
    2 099
    Récepteur
    2 dm800+2 atlas
    TV
    LG 140cm
    Remerciement / J'aime
    slt

    ca m'a lair correct mais vire tout ce qui est avec # devant

    a+
    2 Dream800hd clone oscam
    1pc fixe ubuntu x64 + serveur oscam
    1 atlas HD200-boot et firm a jour-
    1 VPS 2 multics r82 - r80 et oscam
    L'intelligence c'est comme le parachute, quand on n'en a pas on s'écrase....

  5. #5
    DZSatien Habitué
    Inscrit
    Aug 2012
    Lieu
    FRANCE
    Âge
    40
    Messages
    179
    Récepteur
    pinacle 9100HD
    TV
    samsung
    Remerciement / J'aime
    bonjour
    je te remercie de ton aide robocop591
    A+

  6. #6
    DZSatien Confirmé
    Inscrit
    Jun 2012
    Âge
    32
    Messages
    52
    Remerciement / J'aime
    merci mon ami

Sujets similaires

  1. Installation et configuration des fichiers CCcam.cfg et CCcam.prio
    Par hakim16031 dans le forum Entraide CCcam
    Réponses: 4
    Dernier message: 07-06-2012, 02:40
  2. configuration un cccam.cfg
    Par thedreem dans le forum Entraide CCcam
    Réponses: 2
    Dernier message: 19-03-2011, 11:40
  3. configuration cccam cfg
    Par sylvain627 dans le forum Discussions Générales
    Réponses: 3
    Dernier message: 11-12-2010, 21:11
  4. cccam configuration
    Par bonhop dans le forum Entraide Carte DVB
    Réponses: 2
    Dernier message: 07-10-2009, 20:16
  5. Configuration Cccam
    Par amane42 dans le forum Entraide CCcam
    Réponses: 0
    Dernier message: 22-06-2009, 20:04

Règles des messages

  • Vous ne pouvez pas créer de sujets
  • Vous ne pouvez pas répondre aux sujets
  • Vous ne pouvez pas importer de fichiers joints
  • Vous ne pouvez pas modifier vos messages
  •  
Nous contacter | DZSat | Archives | Haut de page