Aide DM800 PVR ne fonctionne plus!

Nada !

Justement j'avais lu quelque par que rester appuyer dessus déchargeait les condo. Donc jl'ai fait. mais meme en rebranchant, que dalle.
 
Nada !

Justement j'avais lu quelque par que rester appuyer dessus déchargeait les condo. Donc jl'ai fait. mais meme en rebranchant, que dalle.
Essai de débranché le ventilo ou le port sata et redémarre en restant appuyé sur marche tout en branchant l' alim. Sinon y a bien un cour circuit quelque par, mais pour savoir il faut déssoudé un composant apres l' autre en commencant par le tunner. Désolé pour ta dream et a demain
 
Le port sata était déja dégagé. J'ai essayé pour le ventilo, et rien.

En tout cas, un enorme merci a toi. C'est super sympa de passer du temps a aider des inconnus dans a galere.
 
De rien si tu veus ont peu encore essayé aujourd hui.Si tu as un pc linux sous la main y a peu etre un truc a faire.Sinon avec le cable RS232 et dreamup comment tu procede?
On peu essayé d' accédé au bios de la dream par telnet:
Copied from another post


Description of how "close" the bad sectors in the Dreambox to flash image in browser
Description of how "close" the bad sectors in the Dreambox to flash image via [COLOR=#0033FF !important]internet browser[/COLOR]
where we have no rs232 port on your computer, or DreamUp crashes all the time with bad sectors error which can not be repaired.

First DM800 off.
Second We press on the chassis power / power plug at the same time / procedure how to [COLOR=#0033FF !important]upload image[/COLOR] ... /
Third STOP - DHCP - IP to display ...
4: Start**** Run**** telnet [ip Dreambox]**** Enter
5: We are in the BIOS of our Dreambox.



6: Set the [COLOR=#0033FF !important]picture[/COLOR] as that is an option
"Flash Sector Recovery" to "enabled"



7: Then go to the last tab "Exit" and save settings / valid without rebooting the tuner /

8: The next steps are the same as when loading the image, the browser will have the additional option enabled message "bad sector recovery enabled"




9: Or, another message / messages when finding bad sectors in a flash they will be "closed" as we are notified.



10: After uploading the image we "reboot" and already we have a fully functional image.
Si tu connais l' IP de ta box tu peu le faire aussi sur windows en tapant CMD dans recherche et ouvre le en administrateur et tape dans la console:
telnet IP de la box
Donne moi la réponse de telnet.
 
Dernière édition:
Retour
Haut