Bonsoir à tous.
Mon demo icone vogue pro est bloque sur load avec un ecran bleu.
j'ai suivi la procédure de flashage en utilisant Vogue_3030+_3030IP+_50+_30+_Tool_v1.5.0.8.exe et sunplus loader
j'obtiens toujours un message d erreur suivant :
DDR Type(DDR3)--
--Tool Path (C:\Users\mr robot\Downloads\icone vogue +loader\loader icone vogue\Step1)--
--RomFile (C:\Users\mr robot\Downloads\3030ip+-loader\Step1\ICONE_I3030_IP_PLUS_bootloader.bin)--
Select DDR Type : DDR2
Select Rom file : C:\Users\mr robot\Downloads\3030ip+-loader\Step1\ICONE_I3030_IP_PLUS_bootloader.bin
Start Uartisp!>>>>>
Enter thread UartISP_Thread
Open COM6 for Connection... Success!
Please Turn On the Power....
[SPHE1506/1505B/C/1508/1509/1506F/1516]Connect to platform successfully!!
Step 0. start read chip stamp...
No Such Stamp ID
No Such Stamp ID
No Such Stamp ID
Step 0. Read IC Stamp fail,Unknown IC !!!
IC Detected Error, Please Turn Off The Power
[Err:-13]exit uartisp Thread!!
Franchement je sèche, ma seule supposition est que le câble d'origine livré avec est hs " c'est un cable rs232 femelle et jack de l autre coté"
si quelqu'un a une solution je suis preneur.
Merci à vous d'avance
Mon demo icone vogue pro est bloque sur load avec un ecran bleu.
j'ai suivi la procédure de flashage en utilisant Vogue_3030+_3030IP+_50+_30+_Tool_v1.5.0.8.exe et sunplus loader
j'obtiens toujours un message d erreur suivant :
DDR Type(DDR3)--
--Tool Path (C:\Users\mr robot\Downloads\icone vogue +loader\loader icone vogue\Step1)--
--RomFile (C:\Users\mr robot\Downloads\3030ip+-loader\Step1\ICONE_I3030_IP_PLUS_bootloader.bin)--
Select DDR Type : DDR2
Select Rom file : C:\Users\mr robot\Downloads\3030ip+-loader\Step1\ICONE_I3030_IP_PLUS_bootloader.bin
Start Uartisp!>>>>>
Enter thread UartISP_Thread
Open COM6 for Connection... Success!
Please Turn On the Power....
[SPHE1506/1505B/C/1508/1509/1506F/1516]Connect to platform successfully!!
Step 0. start read chip stamp...
No Such Stamp ID
No Such Stamp ID
No Such Stamp ID
Step 0. Read IC Stamp fail,Unknown IC !!!
IC Detected Error, Please Turn Off The Power
[Err:-13]exit uartisp Thread!!
Franchement je sèche, ma seule supposition est que le câble d'origine livré avec est hs " c'est un cable rs232 femelle et jack de l autre coté"
si quelqu'un a une solution je suis preneur.
Merci à vous d'avance