NCam_1.2-r3prismicube_BHP

faroukn91

DZSatien Impliqué
Inscrit
15/11/12
Messages
176
cam work 100/100


############################ #############

************************************************************ ************
Important notice !!

This is the OFFICIAL version (20.3.2017)
There are no later versions.

If you have downloaded any version, listed as 1.2, 1.3, 1.4, etc ... These are FAKE versions.
Be very careful when downloading non-OFFICIAL versions,
we are not responsible for those versions or what their authors may have added.

Signed: Javier Sayago (Javilonas)
************************************************************ ************

Compiled:

ncam.mips Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-uclibc Enigma2 - Mipsel (Tiviar Plus and similar).
ncam.x86 Linux PC (32 bit - i686).
ncam.x86_64 Linux PC (64 bit).
ncam.ppc Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4 Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon Enigma2 - (Cortex-A9 - Wetek Play and similar).
ncam.arm-raspbian ARM (Raspberry pi 3, Prismcube and other similars).
ncam-router.mips Routers (Routers MIPSEL DD-WRT).
ncam-x86_64.exe Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).

************************************************************ ************

Ncam settings web::

Ncam Admin Control:
http://127.0.0.1:8181/
(192.168.x.x)
user: root
password: ldteam

Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config

SoftCam.Key Not included!!


************************************************************ ************

Changelog v1.2-r3:

- Fix Cuts every 10 seconds and pixelations for CAIDs 09C4 and 098C.




juste extraire and send prismicube_bhp with dcc and chmod 755
a change ncam.sh camscript ans unistal its work after rebbot good luck
cam work 100/100


############################ #############

************************************************************ ************
Important notice !!

This is the OFFICIAL version (20.3.2017)
There are no later versions.

If you have downloaded any version, listed as 1.2, 1.3, 1.4, etc ... These are FAKE versions.
Be very careful when downloading non-OFFICIAL versions,
we are not responsible for those versions or what their authors may have added.

Signed: Javier Sayago (Javilonas)
************************************************************ ************

Compiled:

ncam.mips Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-uclibc Enigma2 - Mipsel (Tiviar Plus and similar).
ncam.x86 Linux PC (32 bit - i686).
ncam.x86_64 Linux PC (64 bit).
ncam.ppc Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4 Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon Enigma2 - (Cortex-A9 - Wetek Play and similar).
ncam.arm-raspbian ARM (Raspberry pi 3, Prismcube and other similars).
ncam-router.mips Routers (Routers MIPSEL DD-WRT).
ncam-x86_64.exe Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).

************************************************************ ************

Ncam settings web::

Ncam Admin Control:
http://127.0.0.1:8181/
(192.168.x.x)
user: root
password: ldteam

Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config

SoftCam.Key Not included!!


************************************************************ ************

Changelog v1.2-r3:

- Fix Cuts every 10 seconds and pixelations for CAIDs 09C4 and 098C.




juste extraire and send prismicube_bhp with dcc and chmod 755
a change ncam.sh camscript ans unistal its work after rebbot good luck
 

Fichiers joints

  • NCam_1.2-r3prismicube_BHP.rar
    962.1 KB · Affichages: 49
Bonjour
Merci bien, cela a bien fonctionné pour moi sur Prismcube.
De plus j'arrive à utliser l'emu via SoftCam.key, chose qui était impossbile avec Oscam.
RTS Suisse par exemple fonctionne maintenant sans abonnement sharing.
Petite remarque au passage, je trouve qu'il est plus lent que Oscam à ouvrir les chaines. J'ai quelques coupures aussi en Cccam que je n'avais pas en utilisant Oscam.
 
Dernière édition:
Retour
Haut