Bonjour,
J'ai un problème avec mon récepteur Formuler 1. La dernière fois que je l'ai utilisé il fonctionnait normalement. Il y a quelques jours en l'allumant je vois que rien ne s'affiche à l'écran et l'afficheur au niveau du récepteur affiche "BOOTING" mais rien ne se passe.
J'ai donc éteint et rallumé mais rien n'y fait. J'ai donc décidé de reflasher le récepteur (openpli) mais la encore ça ne change rien même en mettant d'autres firmware (openvix, versions anciennes openpli). J'ai également reflashé le bootloader (ça me donne le message de succès sur l'afficheur du récepteur), Pour le flash firmware ça flash mais une fois le boot, c'est bloqué dessus comme indiqué précedemment.
Le récepteur a l'air de détecter les signaux de la télécommande, le lecteur usb détecte la présence de fichier mais voilà je n'ai rien à l'écran malgré le changement de cable HDMI.
J'ai réussi à accéder aux dossiers du récepteur à partir de mon ordinateur et j'ai récupéré un fichier enigma2_crash.
Ci dessous un copié-collé
Merci pour votre aide.
OpenPLi Enigma2 crash log
crashdate=Sat Nov 26 12:17:45 2022
compiledate=Nov 13 2022
skin=Default Skin
sourcedate=2022-11-11
branch=release-8.3
rev=d1b27b4
component=enigma2
kernelcmdline=libata.force=1:3.0G,2:3.0G,3:3.0G ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=240M@16M bmem=450M@512M console=ttyS0,115200n8
imageissue=openpli 8.3-release %h
[gFBDC] no framebuffer available
dmesg
<6>[ 0.056000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
<6>[ 0.056000] TCP: Hash tables configured (established 8192 bind 8192)
<6>[ 0.056000] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.056000] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.056000] NET: Registered protocol family 1
<6>[ 0.057000] RPC: Registered named UNIX socket transport module.
<6>[ 0.057000] RPC: Registered udp transport module.
<6>[ 0.057000] RPC: Registered tcp transport module.
<6>[ 0.057000] RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>[ 0.058000] workingset: timestamp_bits=14 max_order=17 bucket_order=3
<5>[ 0.059000] NFS: Registering the id_resolver key type
<5>[ 0.059000] Key type id_resolver registered
<5>[ 0.059000] Key type id_legacy registered
<6>[ 0.059000] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
<6>[ 0.059000] Installing knfsd (copyright (C) 1996 [email protected]).
<6>[ 0.059000] fuse init (API version 7.26)
<6>[ 0.066000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
<6>[ 0.066000] io scheduler noop registered
<6>[ 0.066000] io scheduler cfq registered (default)
<6>[ 0.066000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[ 0.067000] console [ttyS0] disabled
<6>[ 0.067000] serial8250.0: ttyS0 at MMIO 0x10406900 (irq = 65, base_baud = 5062500) is a 16550A
<6>[ 0.616000] console [ttyS0] enabled
<6>[ 0.620000] serial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66, base_baud = 5062500) is a 16550A
<6>[ 0.629000] serial8250.0: ttyS2 at MMIO 0x10406980 (irq = 67, base_baud = 5062500) is a 16550A
<6>[ 0.645000] loop: module loaded
<6>[ 0.649000] ahci ahci.0: SSS flag set, parallel bus scan disabled
<6>[ 0.665000] ahci ahci.0: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl platform mode
<6>[ 0.673000] ahci ahci.0: flags: ncq sntf stag clo pmp slum part
<6>[ 0.684000] scsi host0: ahci
<6>[ 0.687000] scsi host1: ahci
<6>[ 0.690000] scsi host2: ahci
<5>[ 0.693000] ata1: FORCE: PHY spd limit set to 3.0Gbps
<6>[ 0.698000] ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41
<5>[ 0.706000] ata2: FORCE: PHY spd limit set to 3.0Gbps
<6>[ 0.711000] ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41
<6>[ 0.719000] ata3: DUMMY
<6>[ 0.722000] brcmstb_nand: NAND controller driver is loaded
<6>[ 0.728000] libphy: Fixed MDIO Bus: probed
<7>[ 0.733000] __clk_enable: network [1]
<7>[ 0.733000] __clk_enable: enet [1]
<7>[ 0.733000] bcm40nm_pm_genet_enable 00
<6>[ 0.733000] bcmgenet bcmgenet.0: GENET 2.9 EPHY: 0x00b0
<4>[ 0.738000] bcmgenet bcmgenet.0: failed to get enet-eee clock
<6>[ 1.029000] ata1: SATA link down (SStatus 0 SControl 320)
<6>[ 1.341000] ata2: SATA link down (SStatus 0 SControl 320)
<6>[ 1.471000] libphy: bcmgenet MII bus: probed
<7>[ 1.475000] __clk_disable: enet [0]
<7>[ 1.475000] bcm40nm_pm_genet_disable 00
<7>[ 1.475000] __clk_disable: network [0]
<6>[ 1.476000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<7>[ 1.482000] __clk_enable: usb [1]
<7>[ 1.482000] bcm40nm_pm_usb_enable 00
<6>[ 1.482000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI
<6>[ 1.487000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
<6>[ 1.502000] ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300
<6>[ 1.515000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
<6>[ 1.521000] hub 1-0:1.0: USB hub found
<6>[ 1.525000] hub 1-0:1.0: 1 port detected
<6>[ 1.529000] ehci-brcm ehci-brcm.1: Broadcom STB EHCI
<6>[ 1.534000] ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
<6>[ 1.549000] ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500
<6>[ 1.563000] ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
<6>[ 1.569000] hub 2-0:1.0: USB hub found
<6>[ 1.573000] hub 2-0:1.0: 1 port detected
<6>[ 1.577000] ehci-brcm ehci-brcm.2: Broadcom STB EHCI
<6>[ 1.582000] ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
<6>[ 1.597000] ehci-brcm ehci-brcm.2: irq 74, io mem 0x10490300
<6>[ 1.611000] ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
<6>[ 1.617000] hub 3-0:1.0: USB hub found
<6>[ 1.621000] hub 3-0:1.0: 1 port detected
<6>[ 1.625000] ehci-brcm ehci-brcm.3: Broadcom STB EHCI
<6>[ 1.630000] ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
<6>[ 1.645000] ehci-brcm ehci-brcm.3: irq 75, io mem 0x10490500
<6>[ 1.658000] ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
<6>[ 1.664000] hub 4-0:1.0: USB hub found
<6>[ 1.668000] hub 4-0:1.0: 1 port detected
<6>[ 1.672000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[ 1.678000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI
<6>[ 1.683000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
<6>[ 1.691000] ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400
<6>[ 1.759000] hub 5-0:1.0: USB hub found
<6>[ 1.763000] hub 5-0:1.0: 1 port detected
<6>[ 1.767000] ohci-brcm ohci-brcm.1: Broadcom STB OHCI
<6>[ 1.772000] ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
<6>[ 1.780000] ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600
<6>[ 1.848000] hub 6-0:1.0: USB hub found
<6>[ 1.852000] hub 6-0:1.0: 1 port detected
<6>[ 1.856000] ohci-brcm ohci-brcm.2: Broadcom STB OHCI
<6>[ 1.861000] ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
<6>[ 1.869000] ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400
<6>[ 1.938000] hub 7-0:1.0: USB hub found
<6>[ 1.942000] hub 7-0:1.0: 1 port detected
<6>[ 1.946000] ohci-brcm ohci-brcm.3: Broadcom STB OHCI
<6>[ 1.951000] ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
<6>[ 1.959000] ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600
<6>[ 2.025000] usb 4-1: new high-speed USB device number 2 using ehci-brcm
<6>[ 2.035000] hub 8-0:1.0: USB hub found
<6>[ 2.039000] hub 8-0:1.0: 1 port detected
<6>[ 2.043000] usbcore: registered new interface driver usb-storage
<6>[ 2.050000] mousedev: PS/2 mouse device common for all mice
<6>[ 2.055000] i2c /dev entries driver
<6>[ 2.059000] usbcore: registered new interface driver btusb
<6>[ 2.065000] sdhci: Secure Digital Host Controller Interface driver
<6>[ 2.071000] sdhci: Copyright(c) Pierre Ossman
<6>[ 2.075000] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 2.081000] sdhci-brcmstb sdhci-brcmstb.0: Enabling controller
<4>[ 2.087000] mmc0: Failed to set 32-bit DMA mask.
<4>[ 2.091000] mmc0: No suitable DMA available - falling back to PIO
<6>[ 2.129000] mmc0: SDHCI controller on sdhci-brcmstb.0 [sdhci-brcmstb.0] using PIO
<6>[ 2.136000] hidraw: raw HID events driver (C) Jiri Kosina
<6>[ 2.142000] usbcore: registered new interface driver usbhid
<6>[ 2.147000] usbhid: USB HID core driver
<6>[ 2.152000] NET: Registered protocol family 17
<6>[ 2.157000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 2.163000] Bluetooth: HIDP socket layer initialized
<5>[ 2.168000] Key type dns_resolver registered
<6>[ 2.172000] PM: CP0 COUNT/COMPARE frequency does not depend on divisor
<6>[ 2.180000] EBI CS0: setting up NAND flash (primary)
<6>[ 2.186000] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xdc
<6>[ 2.186000] usb-storage 4-1:1.0: USB Mass Storage device detected
<6>[ 2.186000] scsi host3: usb-storage 4-1:1.0
<6>[ 2.202000] nand: Hynix H27U4G8F2DTR-BC
<6>[ 2.206000] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
<6>[ 2.214000] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xdc
<6>[ 2.220000] nand: Hynix H27U4G8F2DTR-BC
<6>[ 2.224000] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
<6>[ 2.232000] brcmnand brcmnand.0: 512MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
<4>[ 2.243000] Bad block table not found for chip 0
<4>[ 2.249000] Bad block table not found for chip 0
<6>[ 2.253000] Scanning device for bad blocks
<5>[ 2.847000] random: crng init done
<5>[ 3.232000] scsi 3:0:0:0: Direct-Access MXT-USB Storage Device 1501 PQ: 0 ANSI: 0 CCS
<5>[ 3.242000] sd 3:0:0:0: Attached scsi generic sg0 type 0
<5>[ 3.249000] sd 3:0:0:0: [sda] 7733248 512-byte logical blocks: (3.96 GB/3.69 GiB)
<5>[ 3.257000] sd 3:0:0:0: [sda] Write Protect is off
<7>[ 3.262000] sd 3:0:0:0: [sda] Mode Sense: 03 00 00 00
<3>[ 3.262000] sd 3:0:0:0: [sda] No Caching mode page found
<3>[ 3.268000] sd 3:0:0:0: [sda] Assuming drive cache: write through
<3>[ 3.274000] usb usb6-port1: Cannot enable. Maybe the USB cable is bad?
<6>[ 3.286000] sda: sda1
<5>[ 3.291000] sd 3:0:0:0: [sda] Attached SCSI removable disk
<3>[ 4.448000] usb usb6-port1: Cannot enable. Maybe the USB cable is bad?
<6>[ 4.679000] Bad block table written to 0x00001ffe0000, version 0x01
<6>[ 4.687000] Bad block table written to 0x00001ffc0000, version 0x01
<5>[ 4.694000] Creating 3 MTD partitions on "brcmnand.0":
<5>[ 4.699000] 0x000000500000-0x000020000000 : "complete"
<5>[ 4.708000] 0x000000500000-0x000000b00000 : "kernel"
<5>[ 4.714000] 0x000000b00000-0x000020000000 : "rootfs"
<5>[ 4.724000] ubi0: default fastmap pool size: 200
<5>[ 4.728000] ubi0: default fastmap WL pool size: 100
<5>[ 4.733000] ubi0: attaching mtd2
<3>[ 5.632000] usb usb6-port1: Cannot enable. Maybe the USB cable is bad?
<5>[ 6.470000] ubi0: scanning is finished
<3>[ 6.489000] ubi0 error: ubi_update_fastmap: could not find any anchor PEB
<4>[ 6.496000] ubi0 warning: ubi_update_fastmap: Unable to write new fastmap, err=-28
<3>[ 6.505000] ubi0 error: ubi_update_fastmap: could not find any anchor PEB
<4>[ 6.512000] ubi0 warning: ubi_update_fastmap: Unable to write new fastmap, err=-28
<3>[ 6.526000] ubi0 error: ubi_update_fastmap: could not find any anchor PEB
<4>[ 6.533000] ubi0 warning: ubi_update_fastmap: Unable to write new fastmap, err=-28
<3>[ 6.542000] ubi0 error: ubi_update_fastmap: could not find any anchor PEB
<4>[ 6.549000] ubi0 warning: ubi_update_fastmap: Unable to write new fastmap, err=-28
<3>[ 6.563000] ubi0 error: ubi_update_fastmap: could not find any anchor PEB
<4>[ 6.570000] ubi0 warning: ubi_update_fastmap: Unable to write new fastmap, err=-28
<5>[ 6.577000] ubi0: volume 0 ("rootfs") re-sized from 759 to 3922 LEBs
<5>[ 6.584000] ubi0: attached mtd2 (name "rootfs", size 501 MiB)
<5>[ 6.590000] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
<5>[ 6.597000] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
<5>[ 6.604000] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
<5>[ 6.611000] ubi0: good PEBs: 4004, bad PEBs: 4, corrupted PEBs: 0
<5>[ 6.617000] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
<5>[ 6.624000] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 2142826756
<5>[ 6.633000] ubi0: available PEBs: 0, total reserved PEBs: 4004, PEBs reserved for bad PEB handling: 76
<5>[ 6.643000] ubi0: background thread "ubi_bgt0d" started, PID 96
<6>[ 6.643000] ALSA device list:
<6>[ 6.643000] No soundcards found.
<3>[ 6.658000] ubi0 error: ubi_update_fastmap: could not find any anchor PEB
<4>[ 6.664000] ubi0 warning: ubi_update_fastmap: Unable to write new fastmap, err=-28
<5>[ 6.674000] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 97
<5>[ 6.800000] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
<5>[ 6.808000] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
<3>[ 6.808000] usb usb6-port1: Cannot enable. Maybe the USB cable is bad?
<3>[ 6.808000] usb usb6-port1: unable to enumerate USB device
<5>[ 6.830000] UBIFS (ubi0:0): FS size: 496603136 bytes (473 MiB, 3911 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
<5>[ 6.841000] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
<5>[ 6.847000] UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID 389981E0-2AB6-46EE-A478-851E204F7BA9, small LPT model
<6>[ 6.871000] VFS: Mounted root (ubifs filesystem) on device 0:12.
<6>[ 6.891000] devtmpfs: mounted
<6>[ 6.894000] Freeing unused kernel memory: 300K
<4>[ 6.899000] This architecture does not have kernel memory protection.
<4>[ 12.032000] formuler1_1: loading out-of-tree module taints kernel.
<6>[ 12.039000] usbcore: registered new interface driver tpm
<3>[ 13.205000] ubi0 error: ubi_update_fastmap: could not find any anchor PEB
<4>[ 13.212000] ubi0 warning: ubi_update_fastmap: Unable to write new fastmap, err=-28
<30>[ 13.655000] udevd[152]: starting version 3.2.8
<30>[ 13.747000] udevd[153]: starting eudev-3.2.8
<7>[ 15.924000] __clk_enable: network [1]
<7>[ 15.924000] __clk_enable: enet [1]
<7>[ 15.924000] bcm40nm_pm_genet_enable 00
<6>[ 16.050000] bcmgenet bcmgenet.0: configuring instance for external RGMII (TX delay)
<6>[ 17.253000] bcmgenet bcmgenet.0 eth0: Link is Down
<6>[ 19.438000] bcmgenet bcmgenet.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx
J'ai un problème avec mon récepteur Formuler 1. La dernière fois que je l'ai utilisé il fonctionnait normalement. Il y a quelques jours en l'allumant je vois que rien ne s'affiche à l'écran et l'afficheur au niveau du récepteur affiche "BOOTING" mais rien ne se passe.
J'ai donc éteint et rallumé mais rien n'y fait. J'ai donc décidé de reflasher le récepteur (openpli) mais la encore ça ne change rien même en mettant d'autres firmware (openvix, versions anciennes openpli). J'ai également reflashé le bootloader (ça me donne le message de succès sur l'afficheur du récepteur), Pour le flash firmware ça flash mais une fois le boot, c'est bloqué dessus comme indiqué précedemment.
Le récepteur a l'air de détecter les signaux de la télécommande, le lecteur usb détecte la présence de fichier mais voilà je n'ai rien à l'écran malgré le changement de cable HDMI.
J'ai réussi à accéder aux dossiers du récepteur à partir de mon ordinateur et j'ai récupéré un fichier enigma2_crash.
Ci dessous un copié-collé
Merci pour votre aide.
OpenPLi Enigma2 crash log
crashdate=Sat Nov 26 12:17:45 2022
compiledate=Nov 13 2022
skin=Default Skin
sourcedate=2022-11-11
branch=release-8.3
rev=d1b27b4
component=enigma2
kernelcmdline=libata.force=1:3.0G,2:3.0G,3:3.0G ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=240M@16M bmem=450M@512M console=ttyS0,115200n8
imageissue=openpli 8.3-release %h
[gFBDC] no framebuffer available
dmesg
<6>[ 0.056000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
<6>[ 0.056000] TCP: Hash tables configured (established 8192 bind 8192)
<6>[ 0.056000] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.056000] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.056000] NET: Registered protocol family 1
<6>[ 0.057000] RPC: Registered named UNIX socket transport module.
<6>[ 0.057000] RPC: Registered udp transport module.
<6>[ 0.057000] RPC: Registered tcp transport module.
<6>[ 0.057000] RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>[ 0.058000] workingset: timestamp_bits=14 max_order=17 bucket_order=3
<5>[ 0.059000] NFS: Registering the id_resolver key type
<5>[ 0.059000] Key type id_resolver registered
<5>[ 0.059000] Key type id_legacy registered
<6>[ 0.059000] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
<6>[ 0.059000] Installing knfsd (copyright (C) 1996 [email protected]).
<6>[ 0.059000] fuse init (API version 7.26)
<6>[ 0.066000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
<6>[ 0.066000] io scheduler noop registered
<6>[ 0.066000] io scheduler cfq registered (default)
<6>[ 0.066000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[ 0.067000] console [ttyS0] disabled
<6>[ 0.067000] serial8250.0: ttyS0 at MMIO 0x10406900 (irq = 65, base_baud = 5062500) is a 16550A
<6>[ 0.616000] console [ttyS0] enabled
<6>[ 0.620000] serial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66, base_baud = 5062500) is a 16550A
<6>[ 0.629000] serial8250.0: ttyS2 at MMIO 0x10406980 (irq = 67, base_baud = 5062500) is a 16550A
<6>[ 0.645000] loop: module loaded
<6>[ 0.649000] ahci ahci.0: SSS flag set, parallel bus scan disabled
<6>[ 0.665000] ahci ahci.0: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl platform mode
<6>[ 0.673000] ahci ahci.0: flags: ncq sntf stag clo pmp slum part
<6>[ 0.684000] scsi host0: ahci
<6>[ 0.687000] scsi host1: ahci
<6>[ 0.690000] scsi host2: ahci
<5>[ 0.693000] ata1: FORCE: PHY spd limit set to 3.0Gbps
<6>[ 0.698000] ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41
<5>[ 0.706000] ata2: FORCE: PHY spd limit set to 3.0Gbps
<6>[ 0.711000] ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41
<6>[ 0.719000] ata3: DUMMY
<6>[ 0.722000] brcmstb_nand: NAND controller driver is loaded
<6>[ 0.728000] libphy: Fixed MDIO Bus: probed
<7>[ 0.733000] __clk_enable: network [1]
<7>[ 0.733000] __clk_enable: enet [1]
<7>[ 0.733000] bcm40nm_pm_genet_enable 00
<6>[ 0.733000] bcmgenet bcmgenet.0: GENET 2.9 EPHY: 0x00b0
<4>[ 0.738000] bcmgenet bcmgenet.0: failed to get enet-eee clock
<6>[ 1.029000] ata1: SATA link down (SStatus 0 SControl 320)
<6>[ 1.341000] ata2: SATA link down (SStatus 0 SControl 320)
<6>[ 1.471000] libphy: bcmgenet MII bus: probed
<7>[ 1.475000] __clk_disable: enet [0]
<7>[ 1.475000] bcm40nm_pm_genet_disable 00
<7>[ 1.475000] __clk_disable: network [0]
<6>[ 1.476000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<7>[ 1.482000] __clk_enable: usb [1]
<7>[ 1.482000] bcm40nm_pm_usb_enable 00
<6>[ 1.482000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI
<6>[ 1.487000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
<6>[ 1.502000] ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300
<6>[ 1.515000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
<6>[ 1.521000] hub 1-0:1.0: USB hub found
<6>[ 1.525000] hub 1-0:1.0: 1 port detected
<6>[ 1.529000] ehci-brcm ehci-brcm.1: Broadcom STB EHCI
<6>[ 1.534000] ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
<6>[ 1.549000] ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500
<6>[ 1.563000] ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
<6>[ 1.569000] hub 2-0:1.0: USB hub found
<6>[ 1.573000] hub 2-0:1.0: 1 port detected
<6>[ 1.577000] ehci-brcm ehci-brcm.2: Broadcom STB EHCI
<6>[ 1.582000] ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
<6>[ 1.597000] ehci-brcm ehci-brcm.2: irq 74, io mem 0x10490300
<6>[ 1.611000] ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
<6>[ 1.617000] hub 3-0:1.0: USB hub found
<6>[ 1.621000] hub 3-0:1.0: 1 port detected
<6>[ 1.625000] ehci-brcm ehci-brcm.3: Broadcom STB EHCI
<6>[ 1.630000] ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
<6>[ 1.645000] ehci-brcm ehci-brcm.3: irq 75, io mem 0x10490500
<6>[ 1.658000] ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
<6>[ 1.664000] hub 4-0:1.0: USB hub found
<6>[ 1.668000] hub 4-0:1.0: 1 port detected
<6>[ 1.672000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[ 1.678000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI
<6>[ 1.683000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
<6>[ 1.691000] ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400
<6>[ 1.759000] hub 5-0:1.0: USB hub found
<6>[ 1.763000] hub 5-0:1.0: 1 port detected
<6>[ 1.767000] ohci-brcm ohci-brcm.1: Broadcom STB OHCI
<6>[ 1.772000] ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
<6>[ 1.780000] ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600
<6>[ 1.848000] hub 6-0:1.0: USB hub found
<6>[ 1.852000] hub 6-0:1.0: 1 port detected
<6>[ 1.856000] ohci-brcm ohci-brcm.2: Broadcom STB OHCI
<6>[ 1.861000] ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
<6>[ 1.869000] ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400
<6>[ 1.938000] hub 7-0:1.0: USB hub found
<6>[ 1.942000] hub 7-0:1.0: 1 port detected
<6>[ 1.946000] ohci-brcm ohci-brcm.3: Broadcom STB OHCI
<6>[ 1.951000] ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
<6>[ 1.959000] ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600
<6>[ 2.025000] usb 4-1: new high-speed USB device number 2 using ehci-brcm
<6>[ 2.035000] hub 8-0:1.0: USB hub found
<6>[ 2.039000] hub 8-0:1.0: 1 port detected
<6>[ 2.043000] usbcore: registered new interface driver usb-storage
<6>[ 2.050000] mousedev: PS/2 mouse device common for all mice
<6>[ 2.055000] i2c /dev entries driver
<6>[ 2.059000] usbcore: registered new interface driver btusb
<6>[ 2.065000] sdhci: Secure Digital Host Controller Interface driver
<6>[ 2.071000] sdhci: Copyright(c) Pierre Ossman
<6>[ 2.075000] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 2.081000] sdhci-brcmstb sdhci-brcmstb.0: Enabling controller
<4>[ 2.087000] mmc0: Failed to set 32-bit DMA mask.
<4>[ 2.091000] mmc0: No suitable DMA available - falling back to PIO
<6>[ 2.129000] mmc0: SDHCI controller on sdhci-brcmstb.0 [sdhci-brcmstb.0] using PIO
<6>[ 2.136000] hidraw: raw HID events driver (C) Jiri Kosina
<6>[ 2.142000] usbcore: registered new interface driver usbhid
<6>[ 2.147000] usbhid: USB HID core driver
<6>[ 2.152000] NET: Registered protocol family 17
<6>[ 2.157000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 2.163000] Bluetooth: HIDP socket layer initialized
<5>[ 2.168000] Key type dns_resolver registered
<6>[ 2.172000] PM: CP0 COUNT/COMPARE frequency does not depend on divisor
<6>[ 2.180000] EBI CS0: setting up NAND flash (primary)
<6>[ 2.186000] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xdc
<6>[ 2.186000] usb-storage 4-1:1.0: USB Mass Storage device detected
<6>[ 2.186000] scsi host3: usb-storage 4-1:1.0
<6>[ 2.202000] nand: Hynix H27U4G8F2DTR-BC
<6>[ 2.206000] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
<6>[ 2.214000] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xdc
<6>[ 2.220000] nand: Hynix H27U4G8F2DTR-BC
<6>[ 2.224000] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
<6>[ 2.232000] brcmnand brcmnand.0: 512MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
<4>[ 2.243000] Bad block table not found for chip 0
<4>[ 2.249000] Bad block table not found for chip 0
<6>[ 2.253000] Scanning device for bad blocks
<5>[ 2.847000] random: crng init done
<5>[ 3.232000] scsi 3:0:0:0: Direct-Access MXT-USB Storage Device 1501 PQ: 0 ANSI: 0 CCS
<5>[ 3.242000] sd 3:0:0:0: Attached scsi generic sg0 type 0
<5>[ 3.249000] sd 3:0:0:0: [sda] 7733248 512-byte logical blocks: (3.96 GB/3.69 GiB)
<5>[ 3.257000] sd 3:0:0:0: [sda] Write Protect is off
<7>[ 3.262000] sd 3:0:0:0: [sda] Mode Sense: 03 00 00 00
<3>[ 3.262000] sd 3:0:0:0: [sda] No Caching mode page found
<3>[ 3.268000] sd 3:0:0:0: [sda] Assuming drive cache: write through
<3>[ 3.274000] usb usb6-port1: Cannot enable. Maybe the USB cable is bad?
<6>[ 3.286000] sda: sda1
<5>[ 3.291000] sd 3:0:0:0: [sda] Attached SCSI removable disk
<3>[ 4.448000] usb usb6-port1: Cannot enable. Maybe the USB cable is bad?
<6>[ 4.679000] Bad block table written to 0x00001ffe0000, version 0x01
<6>[ 4.687000] Bad block table written to 0x00001ffc0000, version 0x01
<5>[ 4.694000] Creating 3 MTD partitions on "brcmnand.0":
<5>[ 4.699000] 0x000000500000-0x000020000000 : "complete"
<5>[ 4.708000] 0x000000500000-0x000000b00000 : "kernel"
<5>[ 4.714000] 0x000000b00000-0x000020000000 : "rootfs"
<5>[ 4.724000] ubi0: default fastmap pool size: 200
<5>[ 4.728000] ubi0: default fastmap WL pool size: 100
<5>[ 4.733000] ubi0: attaching mtd2
<3>[ 5.632000] usb usb6-port1: Cannot enable. Maybe the USB cable is bad?
<5>[ 6.470000] ubi0: scanning is finished
<3>[ 6.489000] ubi0 error: ubi_update_fastmap: could not find any anchor PEB
<4>[ 6.496000] ubi0 warning: ubi_update_fastmap: Unable to write new fastmap, err=-28
<3>[ 6.505000] ubi0 error: ubi_update_fastmap: could not find any anchor PEB
<4>[ 6.512000] ubi0 warning: ubi_update_fastmap: Unable to write new fastmap, err=-28
<3>[ 6.526000] ubi0 error: ubi_update_fastmap: could not find any anchor PEB
<4>[ 6.533000] ubi0 warning: ubi_update_fastmap: Unable to write new fastmap, err=-28
<3>[ 6.542000] ubi0 error: ubi_update_fastmap: could not find any anchor PEB
<4>[ 6.549000] ubi0 warning: ubi_update_fastmap: Unable to write new fastmap, err=-28
<3>[ 6.563000] ubi0 error: ubi_update_fastmap: could not find any anchor PEB
<4>[ 6.570000] ubi0 warning: ubi_update_fastmap: Unable to write new fastmap, err=-28
<5>[ 6.577000] ubi0: volume 0 ("rootfs") re-sized from 759 to 3922 LEBs
<5>[ 6.584000] ubi0: attached mtd2 (name "rootfs", size 501 MiB)
<5>[ 6.590000] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
<5>[ 6.597000] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
<5>[ 6.604000] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
<5>[ 6.611000] ubi0: good PEBs: 4004, bad PEBs: 4, corrupted PEBs: 0
<5>[ 6.617000] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
<5>[ 6.624000] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 2142826756
<5>[ 6.633000] ubi0: available PEBs: 0, total reserved PEBs: 4004, PEBs reserved for bad PEB handling: 76
<5>[ 6.643000] ubi0: background thread "ubi_bgt0d" started, PID 96
<6>[ 6.643000] ALSA device list:
<6>[ 6.643000] No soundcards found.
<3>[ 6.658000] ubi0 error: ubi_update_fastmap: could not find any anchor PEB
<4>[ 6.664000] ubi0 warning: ubi_update_fastmap: Unable to write new fastmap, err=-28
<5>[ 6.674000] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 97
<5>[ 6.800000] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
<5>[ 6.808000] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
<3>[ 6.808000] usb usb6-port1: Cannot enable. Maybe the USB cable is bad?
<3>[ 6.808000] usb usb6-port1: unable to enumerate USB device
<5>[ 6.830000] UBIFS (ubi0:0): FS size: 496603136 bytes (473 MiB, 3911 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
<5>[ 6.841000] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
<5>[ 6.847000] UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID 389981E0-2AB6-46EE-A478-851E204F7BA9, small LPT model
<6>[ 6.871000] VFS: Mounted root (ubifs filesystem) on device 0:12.
<6>[ 6.891000] devtmpfs: mounted
<6>[ 6.894000] Freeing unused kernel memory: 300K
<4>[ 6.899000] This architecture does not have kernel memory protection.
<4>[ 12.032000] formuler1_1: loading out-of-tree module taints kernel.
<6>[ 12.039000] usbcore: registered new interface driver tpm
<3>[ 13.205000] ubi0 error: ubi_update_fastmap: could not find any anchor PEB
<4>[ 13.212000] ubi0 warning: ubi_update_fastmap: Unable to write new fastmap, err=-28
<30>[ 13.655000] udevd[152]: starting version 3.2.8
<30>[ 13.747000] udevd[153]: starting eudev-3.2.8
<7>[ 15.924000] __clk_enable: network [1]
<7>[ 15.924000] __clk_enable: enet [1]
<7>[ 15.924000] bcm40nm_pm_genet_enable 00
<6>[ 16.050000] bcmgenet bcmgenet.0: configuring instance for external RGMII (TX delay)
<6>[ 17.253000] bcmgenet bcmgenet.0 eth0: Link is Down
<6>[ 19.438000] bcmgenet bcmgenet.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx
