Mise a jour OpenPLi 6.2 for DREAMBOX 900 UHD (enigma2.net TEAM)

rednass2

DZSatien Légendaire
Inscrit
7/11/15
Messages
1 233
Plugins
BiteRate
IPTV PLAYER
KODI 17
LIVEFOOTBALL
YOUTUBE
OSCAM Status View
OcamINfo
PiconManager
SKINS
HDGLASS 17
SOFTCAM:
CCCAM 2.3.2
Configuration /etc
OSCAM 11439
Configuration /etc/tuxbox/config
NCAM 7.3

Configuration /etc/tuxbox/config
PICONS
ASTRA 19.2e
HOTBIRD 13.0E
THOR 0.8W
SATELLITE
ASTRA 19.2E
HOTBIRD 13.0E
THOR 0.8W
TELNET-FTP
USER : root
PASSWORD : enigma2.net
cache.php
cache.php

cache.php

cache.php

cache.php

cache.php

cache.php

cache.php



 
Bnsoir,
Je viens de MAJ ma DM900 4k avec

OpenPLi 6.2 for DREAMBOX 900 UHD (enigma2.net TEAM)​

Et je me retrouve bloqué depuis 2 heures avec :
1/ le bouton en façade qui clignote rouge
2/ la barre de progression figée à 1/3 de sa course.
3/ le mode rescue en appuyant sur le bouton après redémarrage ne fonctionne pas non plus
4/ et à chaque redémarrage il se remet à clignoter rouge et bloqué à 30% au niveau de la gauge de progression
5/ je peux iniquement me connecter via le mini usb à l'arrière de la box avec putty (pour voir les logs au démarrage) en via le port COM à 115200
6/ J'ai chercher un peu partout le moyen de faire un restore d'usine via le port mini-usb, je n'ai rien trouver d'efficace.

Donc quelqu'un peut-il m'aider à récupérer ma box?
MERCI.

voici le logs obtenu :




Dreambox DM900
AVS init...
AVS init OK
AVS load:select_image: addr_offset: 00051000 part_offset: 00000000 bootStatus: 2a002b00
AVS load_code offset =00051000
LOADED
AVS: overtemp mon ON


single board
select_image: addr_offset: 00055000 part_offset: 00000000 bootStatus: 3d2b2500
MEMSYS-STD
SHMOO 02010000 BLD:11138M HW:hpf0_b1p6 V:2.1.0.0
MCB: FLEX
AVS start:status=000000ff
STB: Current voltage=00000388(904)
temperature=0000f372(62322)
PV=0000034a(842)
MV=0000038a(906)
AVS FW rev=30333278 [0.3.2.x]
OK
DDR0: !@ ffe0e780 <= ffe0df10 MEMSYS-0 @ f1100000 OK
DDR1: =@ ffe0e780 <= ffe0df10 MEMSYS-1 @ f1180000 OK
Sdram Scramble OTP = 0x00000001
Sdram Scramble OK
select_image: addr_offset: 00020000 part_offset: 00000000 bootStatus: 1b25252b
BFW load mode OTP = 0x0000000f
bfw_hash_locked = 0x00000000
BFW key3 OK, BFW load OK
BFW v2.1.0
COPY CODE... DONE
MICH: disable success
SSBL
PINMUX
CACHE FLUSH OK
MMU ON
CACHE FLUSH OK
_fbss 07080cd0
_ebss 0713dd70
_end 0713dd90
HEAP @ 07200000
STACK @ 09300000
ARCH: CONFIG OK
CLR BSS 07080cd0 to 0713dd70 OK
CLR SRAM OK
CACHE FLUSH OK
CPU CLKSET OK
GO!


,/
,'/___, BOLT v1.18 v1.18 LOCAL BUILD
.'__ ,' (2016-12-01 16:24:31 cynric@cynric-VirtualBox)
/,' Copyright (C) 2016 Broadcom
/'


Board: BCM97252SSFF
SYS_CTRL: product=72521, family=7439b1, strap=000000b2,
otp @ 0xf0404030 = 0x822000e0: en_cr(0x00000060) en_testport(0x00000080) macrovision_disable(0x02000000) moca_disable(0x80000000) rv9_disable(0x00200000)
otp @ 0xf0404034 = 0x00000021: moca2_disable(0x00000001) rfm_disable(0x00000020)
CPU: 2x B15 [420f00f3] 1719 MHz
SCB: 432 MHz
DDR0 @ 1067MHz, DDR1 @ 1067MHz
RESET CAUSE: 0x000001 power_on (1 of 23 possible causes)
CS0: SFDP SPI, 32MB, 64kB blocks, 64kB erase block, 256B pages
CS1: NAND: unrecognized ID: 0xffff 0xffffffff
RTS0: 0x1101004, 256 clients, ok
RTS1: 0x1181004, 256 clients, ok
BOX MODE: 5
card if inited
set pwm to 0/255
disp id 5420
load image
AVS: park check
AVS: temperature monitoring enabled
AVS: STB: V=0.904V, T=+63.296C, PV=0.842V, MV=0.906V, FW=30333278 [0.3.2.x]
USB otp=00000040
USB @ 0xf0470200: IPP is active low, IOC is negative polarity
init fp
found card in unknown state
ca valid!
set pwm to 200/255
Normal bootup
Loader:zimg Filesys:raw Dev:emmcflash0.kernel File: Options:(null)
Reading 4305120 bytes from zImage...........
Starting program at 0x8000 (DTB @ 0x7728000)


32 bit boot...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.14-1.17-dm900 (oe-user@oe-host) (gcc version 6.3.0 (GCC) ) #1 SMP Sun May 20 14:23:44 UTC 2018
[ 0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c7387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] Machine model: BCM97252SSFF
[ 0.000000] moving dtb from 0x0000000007728000 to 0x000000000085bb88
[ 0.000000] bmem: Reserved 640 MiB at 0x0000000018000000
[ 0.000000] bmem: Reserved 384 MiB at 0x0000000080000000
[ 0.000000] cma: Reserved 16 MiB at 0x000000000f000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] MCP: Enabling write pairing
[ 0.000000] PERCPU: Embedded 8 pages/cpu @cdfc0000 s8384 r8192 d16192 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 523776
[ 0.000000] Kernel command line: bmem=640M@384M bmem=384M@2048M console=ttyS0,1000000 root=/dev/mmcblk0p2 rootwait rootfstype=ext4 coherent_pool=2M
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 1006760K/2097152K available (6197K kernel code, 230K rwdata, 1636K rodata, 244K init, 208K bss, 1074008K reserved, 16384K cma-reserved, 786428K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc07ae758 (7834 kB)
[ 0.000000] .init : 0xc07af000 - 0xc07ec0c0 ( 245 kB)
[ 0.000000] .data : 0xc07ee000 - 0xc0827ae0 ( 231 kB)
[ 0.000000] .bss : 0xc0827ae8 - 0xc085bb88 ( 209 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc403000, parent irq: 93)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc3e1000, parent irq: 64)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc410640, parent irq: 95)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc4d1200, parent irq: 58)
[ 0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
[ 0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 2545165795328ns
[ 0.000009] Switching to timer-based delay loop
[ 0.000229] Console: colour dummy device 80x30
[ 0.000248] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
[ 0.000257] pid_max: default: 32768 minimum: 301
[ 0.000353] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000357] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.005831] Initializing cgroup subsys devices
[ 0.005846] Initializing cgroup subsys freezer
[ 0.005853] Initializing cgroup subsys net_cls
[ 0.005881] CPU: Testing write buffer coherency: ok
[ 0.006098] CPU0: update cpu_power 1024
[ 0.006103] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.006151] Setting up static identity map for 0x5ea228 - 0x5ea280
[ 0.007363] CPU1: Booted secondary processor
[ 0.007380] CPU1: update cpu_power 1024
[ 0.007383] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.007453] Brought up 2 CPUs
[ 0.007463] SMP: Total of 2 processors activated (108.00 BogoMIPS).
[ 0.007468] CPU: All CPU(s) started in SVC mode.
[ 0.007849] devtmpfs: initialized
[ 0.011282] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
[ 0.011845] regulator-dummy: no parameters
[ 0.012014] NET: Registered protocol family 16
[ 0.012964] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[ 0.013167] cpuidle: using governor ladder
[ 0.013173] cpuidle: using governor menu
[ 0.014302] irq: no irq domain found for /rdb/interrupt-controller@f040a700 !
[ 0.014385] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
[ 0.016042] syscon f0404000.syscon: regmap [mem 0xf0404000-0xf0404523] registered
[ 0.016130] syscon f03e2400.syscon: regmap [mem 0xf03e2400-0xf03e27ff] registered
[ 0.016198] syscon f0452000.syscon: regmap [mem 0xf0452000-0xf04520ff] registered
[ 0.016263] syscon f0404100.syscon: regmap [mem 0xf0404100-0xf040415b] registered
[ 0.016325] syscon f040415c.syscon: regmap [mem 0xf040415c-0xf040419b] registered
[ 0.016391] syscon f0410700.syscon: regmap [mem 0xf0410700-0xf041070b] registered
[ 0.016458] syscon f041070c.syscon: regmap [mem 0xf041070c-0xf0410713] registered
[ 0.016522] syscon f1101004.syscon: regmap [mem 0xf1101004-0xf1101403] registered
[ 0.016584] syscon f1181004.syscon: regmap [mem 0xf1181004-0xf1181403] registered
[ 0.016653] syscon f0404080.syscon: regmap [mem 0xf0404080-0xf0404083] registered
[ 0.016720] syscon f04040a4.syscon: regmap [mem 0xf04040a4-0xf04040a7] registered
[ 0.016782] syscon f03e0154.syscon: regmap [mem 0xf03e0154-0xf03e0157] registered
[ 0.016845] syscon f03e0354.syscon: regmap [mem 0xf03e0354-0xf03e0357] registered
[ 0.016909] syscon f03e0400.syscon: regmap [mem 0xf03e0400-0xf03e0403] registered
[ 0.017217] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
[ 0.017438] Broadcom Brahma-B15 readahead cache at: 0xfc3e2478
[ 0.021832] bio: create slab <bio-0> at 0
[ 0.022126] brcmstb-gpio f040a600.gpio: Couldn't get IRQ. Enable CONFIG_BCM7120_L2_IRQ if you want GPIO interrupt support
[ 0.022170] brcmstb-gpio f040a600.gpio: Registered 5 banks (GPIO(s): 0-159)
[ 0.022201] brcmstb-gpio f0417400.gpio: Couldn't get IRQ. Enable CONFIG_BCM7120_L2_IRQ if you want GPIO interrupt support
[ 0.022213] brcmstb-gpio f0417400.gpio: Registered 2 banks (GPIO(s): 160-223)
[ 0.022555] SCSI subsystem initialized
[ 0.022774] usbcore: registered new interface driver usbfs
[ 0.022803] usbcore: registered new interface driver hub
[ 0.022862] usbcore: registered new device driver usb
[ 0.022900] media: Linux media interface: v0.10
[ 0.022923] Linux video capture interface: v2.00
[ 0.022960] pps_core: LinuxPPS API ver. 1 registered
[ 0.022964] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.022973] PTP clock support registered
[ 0.023208] Advanced Linux Sound Architecture Driver Initialized.
[ 0.023497] Bluetooth: Core ver 2.18
[ 0.023511] NET: Registered protocol family 31
[ 0.023515] Bluetooth: HCI device and connection manager initialized
[ 0.023523] Bluetooth: HCI socket layer initialized
[ 0.023529] Bluetooth: L2CAP socket layer initialized
[ 0.023535] Bluetooth: SCO socket layer initialized
[ 0.023809] cfg80211: Calling CRDA to update world regulatory domain
[ 0.024069] Switched to clocksource arch_sys_counter
[ 0.028450] thermal thermal_zone0: failed to read out thermal zone 0
[ 0.028535] NET: Registered protocol family 2
[ 0.028950] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.028965] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.028987] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.029021] TCP: reno registered
[ 0.029028] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.029039] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.029166] NET: Registered protocol family 1
[ 0.029383] RPC: Registered named UNIX socket transport module.
[ 0.029388] RPC: Registered udp transport module.
[ 0.029391] RPC: Registered tcp transport module.
[ 0.029394] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.029998] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.030351] bounce pool size: 64 pages
[ 0.030868] NFS: Registering the id_resolver key type
[ 0.030900] Key type id_resolver registered
[ 0.030904] Key type id_legacy registered
[ 0.030913] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.031037] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 0.031349] msgmni has been set to 462
[ 0.032158] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.032166] io scheduler noop registered
[ 0.032181] io scheduler cfq registered (default)
[ 0.032398] brcm-gisb-arb f0400000.gisb-arb: registered mem: fc400000, irqs: 258, 259
[ 0.032674] brcm-usb-phy f0470200.usb-phy: USB3.0 clock not found in Device Tree
[ 0.098347] brcmstb_memc f1102000.memc-ddr: registered
[ 0.098373] brcmstb_memc f1182000.memc-ddr: registered
[ 0.098558] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.099326] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
[ 0.195998] console [ttyS0] enabled
[ 0.197221] loop: module loaded
[ 0.197865] ahci brcmstb-ahci.0: can't get clock
[ 0.198484] ahci brcmstb-ahci.0: SSS flag set, parallel bus scan disabled
[ 0.210085] ahci brcmstb-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 0.211081] ahci brcmstb-ahci.0: flags: 64bit ncq sntf stag pm clo pmp slum part
[ 0.213713] scsi0 : ahci_platform
[ 0.214343] scsi1 : ahci_platform
[ 0.214848] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
[ 0.215767] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
[ 0.217203] spi_brcmstb f03e3400.spi: 1-lane output, 3-byte address
[ 0.217973] spi_brcmstb f03e3400.spi: master is unqueued, this is deprecated
[ 0.219133] m25p80 spi32766.0: found mx25l25635e, expected m25p80
[ 0.219845] spi_brcmstb f03e3400.spi: 1-lane output, 4-byte address
[ 0.220580] m25p80 spi32766.0: mx25l25635e (32768 Kbytes)
[ 0.221227] 5 ofpart partitions found on MTD device spi32766.0
[ 0.221897] Creating 5 MTD partitions on "spi32766.0":
[ 0.222499] 0x000000000000-0x000000200000 : "flash0.bolt"
[ 0.223625] 0x000000200000-0x000000220000 : "flash0.nvram"
[ 0.224680] 0x000000220000-0x000000240000 : "flash0.devtree"
[ 0.225734] 0x000000240000-0x000001000000 : "flash0.recovery"
[ 0.226807] 0x000000000000-0x000002000000 : "flash0"
[ 0.228088] libphy: Fixed MDIO Bus: probed
[ 0.228913] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
[ 0.242071] libphy: bcmgenet MII bus: probed
[ 0.262943] xhci-brcm: xHCI BRCM driver
[ 0.263467] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
[ 0.264138] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
[ 0.265331] xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
[ 0.266180] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.266960] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.267797] usb usb1: Product: xHCI Host Controller
[ 0.268364] usb usb1: Manufacturer: Linux 3.14-1.17-dm900 xhci-hcd
[ 0.269086] usb usb1: SerialNumber: f0471000.xhci_v2
[ 0.269976] hub 1-0:1.0: USB hub found
[ 0.270440] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 0.271380] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
[ 0.272034] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
[ 0.273067] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.273845] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.274678] usb usb2: Product: xHCI Host Controller
[ 0.275250] usb usb2: Manufacturer: Linux 3.14-1.17-dm900 xhci-hcd
[ 0.275960] usb usb2: SerialNumber: f0471000.xhci_v2
[ 0.276803] hub 2-0:1.0: USB hub found
[ 0.277263] hub 2-0:1.0: 2 ports detected
[ 0.278029] ehci-brcm: EHCI BRCM driver
[ 0.278552] ehci-brcm f0470300.ehci_v2: EHCI Host Controller
[ 0.279223] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
[ 0.290228] ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
[ 0.296076] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
[ 0.296884] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.297672] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.298506] usb usb3: Product: EHCI Host Controller
[ 0.299073] usb usb3: Manufacturer: Linux 3.14-1.17-dm900 ehci_hcd
[ 0.299783] usb usb3: SerialNumber: f0470300.ehci_v2
[ 0.300636] hub 3-0:1.0: USB hub found
[ 0.301096] hub 3-0:1.0: 1 port detected
[ 0.301736] ehci-brcm f0470500.ehci_v2: EHCI Host Controller
[ 0.302407] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
[ 0.313409] ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
[ 0.320071] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
[ 0.320873] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.321659] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.322493] usb usb4: Product: EHCI Host Controller
[ 0.323054] usb usb4: Manufacturer: Linux 3.14-1.17-dm900 ehci_hcd
[ 0.323770] usb usb4: SerialNumber: f0470500.ehci_v2
[ 0.324600] hub 4-0:1.0: USB hub found
[ 0.325050] hub 4-0:1.0: 1 port detected
[ 0.325753] ohci-brcm: OHCI BRCM driver
[ 0.326261] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
[ 0.326919] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
[ 0.327081] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.328458] ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
[ 0.384187] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.384968] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.385802] usb usb5: Product: BRCM OHCI controller
[ 0.386369] usb usb5: Manufacturer: Linux 3.14-1.17-dm900 ohci_hcd
[ 0.387085] usb usb5: SerialNumber: f0470400.ohci_v2
[ 0.387944] hub 5-0:1.0: USB hub found
[ 0.388417] hub 5-0:1.0: 1 port detected
[ 0.389090] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
[ 0.389749] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
[ 0.390670] ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
[ 0.439075] ata2: SATA link down (SStatus 0 SControl 300)
[ 0.446172] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.446953] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.447788] usb usb6: Product: BRCM OHCI controller
[ 0.448355] usb usb6: Manufacturer: Linux 3.14-1.17-dm900 ohci_hcd
[ 0.449071] usb usb6: SerialNumber: f0470600.ohci_v2
[ 0.449895] hub 6-0:1.0: USB hub found
[ 0.450362] hub 6-0:1.0: 1 port detected
[ 0.451080] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.451830] ehci-pci: EHCI PCI platform driver
[ 0.452385] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.453107] ohci-pci: OHCI PCI platform driver
[ 0.453732] usbcore: registered new interface driver usb-storage
[ 0.454471] i2c /dev entries driver
[ 0.454916] lirc_dev: IR Remote Control driver registered, major 250
[ 0.455978] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
[ 0.456970] usbcore: registered new interface driver btusb
[ 0.457660] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 0.458475] brcmstb-cpufreq: probe of f03e257c.cpu-clk-div failed with error -17
[ 0.459408] sdhci: Secure Digital Host Controller Interface driver
[ 0.460125] sdhci: Copyright(c) Pierre Ossman
[ 0.460627] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.462374] mmc0: no vqmmc regulator found
[ 0.462846] mmc0: no vmmc regulator found
[ 0.493074] mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA
[ 0.494984] mmc1: no vqmmc regulator found
[ 0.495463] mmc1: no vmmc regulator found
[ 0.526070] mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
[ 0.527017] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.527727] usbcore: registered new interface driver usbhid
[ 0.528374] usbhid: USB HID core driver
[ 0.530809] TCP: cubic registered
[ 0.531810] NET: Registered protocol family 10
[ 0.532798] NET: Registered protocol family 17
[ 0.533540] Bluetooth: RFCOMM TTY layer initialized
[ 0.534121] Bluetooth: RFCOMM socket layer initialized
[ 0.534711] Bluetooth: RFCOMM ver 1.11
[ 0.535150] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 0.535760] Bluetooth: BNEP filters: protocol multicast
[ 0.536368] Bluetooth: BNEP socket layer initialized
[ 0.536939] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 0.537629] Bluetooth: HIDP socket layer initialized
[ 0.538249] l2tp_core: L2TP core driver, V2.0
[ 0.538772] Key type dns_resolver registered
[ 0.539344] Registering SWP/SWPB emulation handler
[ 0.540178] regulator-dummy: disabling
[ 0.542857] ALSA device list:
[ 0.543213] No soundcards found.
[ 0.543833] Waiting for root device /dev/mmcblk0p2...
[ 0.595712] mmc1: BKOPS_EN bit is not set
[ 0.602415] mmc1: new high speed MMC card at address 0001
[ 0.603243] mmcblk0: mmc1:0001 4FPD3R 3.64 GiB
[ 0.603855] mmcblk0boot0: mmc1:0001 4FPD3R partition 1 4.00 MiB
[ 0.604639] mmcblk0boot1: mmc1:0001 4FPD3R partition 2 4.00 MiB
[ 0.605413] mmcblk0rpmb: mmc1:0001 4FPD3R partition 3 512 KiB
[ 0.609332] mmcblk0: p1 p2 p3
[ 0.612015] mmcblk0boot1: unknown partition table
[ 0.613053] mmcblk0boot0: unknown partition table
[ 0.646450] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[ 0.647303] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[ 0.667305] EXT4-fs (mmcblk0p2): recovery complete
[ 0.668427] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 0.669392] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 0.673952] devtmpfs: mounted
INIT: version 2.88 booting
Starting fake hwclock: loading system time.
Sat Jun 2 17:40:45 UTC 2018
[ 0.871025] fuse init (API version 7.22)
[ 1.121816] stb_core: module license 'Proprietary' taints kernel.
[ 1.122536] Disabling lock debugging due to kernel taint
[ 1.171338] input: dreambox remote control (native) as /devices/virtual/input/input0
[ 1.175606] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
[ 1.179231] random: nonblocking pool is initialized
[ 1.380476] bcm7439: xvd 20160630, vdc 20160630, rap 20160630, xpt 20160630, driver version 20180409-dm900-4-g9e86
[ 1.994485] 1:993424771 SMCB: controller reset timed out
[ 2.355700] register adapter
[ 2.357999] register adapter
[ 2.361195] register adapter
[ 2.365376] register adapter
[ 2.372709] register adapter
[ 2.374953] FP did not respond
[ 2.377153] input: dreambox front panel as /devices/virtual/input/input2
[ 2.383377] HDMI: CEC start ... state is now 1
[ 2.384443] set input to 0
[ 2.384767] set fb to 2(-1)
[ 2.386690] startvideomode '1080p50' read from /etc/videomode
[ 2.389188] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
[ 2.457177] HDMI: now connected
[ 2.485968] HDMI: CEC Physical Addr 3.0.0.0 set from EDID
[ 2.486600] HDMI: EDID read ok
[ 2.486954] HDMI: initial mode set!
[ 2.487367] using 50.00Hz as MonitorRefreshRate
[ 2.487890] SET FORMAT: display[0], format='1080p50'
[ 2.488472] HDMI mode
[ 2.488736] use EDID to detect colorspace
[ 2.489204] preferred colorspace: Itu_R_BT_709
[ 2.489714] using 8bit output
[ 2.914893] VIDEO0: enable deinterlacer
[ 2.915462] VIDEO0: set fallback framerate to 60000
[ 2.916029] VIDEO0: set progressive override mode to 1
[ 2.916629] VIDEO0: set streamtype!
[ 2.917033] -> set MPEG2
[ 2.917380] -> sw rave disabled!
[ 3.002260] VIDEO1: set fallback framerate to 60000
[ 3.002831] VIDEO1: set progressive override mode to 1
[ 3.003432] VIDEO1: set streamtype!
[ 3.003836] -> set MPEG2
[ 3.004184] -> sw rave disabled!
[ 3.040125] VIDEO2: set fallback framerate to 60000
[ 3.040692] VIDEO2: set progressive override mode to 1
[ 3.041291] VIDEO2: set streamtype!
[ 3.041695] -> set MPEG2
[ 3.042037] -> sw rave disabled!
[ 3.055364] set ac3 to downmix
[ 3.055728] set wmapro to downmix
[ 3.056132] set ac3plus to use_hdmi_caps
[ 3.056588] set dtshd to force_dts
[ 3.056985] set aac to downmix
[ 3.057687] audio ch2: add stereo (background decoder) input to mixer DUMMY2
[ 3.058553] audio ch1: add stereo (hdmi-rx) input to mixer DUMMY
[ 3.059770] DVB: registering new adapter (BCM7439)
[ 3.164021] autodetecting NIMs...
[ 3.676078] Found: Slot 0, ID: 19 (by CA)
[ 3.676549] Initializing adapter 0 (Si2166B-DVB-S2)
[ 3.678754] (NULL device *): DVB: registering adapter 0 frontend 0 (Si2166B)...
[ 3.679944] Initializing adapter 1 (Si2166B-DVB-S2)
[ 3.688873] (NULL device *): DVB: registering adapter 0 frontend 1 (Si2166B)...
[ 3.690757] CI stopped...
[ 3.691329] init ALSA!
[ 3.708286] registered vtuner misc/vtuner0, minor 49
[ 3.709924] registered vtuner misc/vtuner1, minor 48
[ 3.711424] registered vtuner misc/vtuner2, minor 47
[ 3.712736] registered vtuner misc/vtuner3, minor 46
[ 3.713347] HDMI-RX: init
[ 3.714441] HDMI-RX: no device attached
[ 3.714929] HDMI-RX: video format change event
[ 3.715460] HDMI-RX: hdmi packet status stopped
[ 3.715988] HDMI-RX: hdmiInput0 Receiving DVI format
[ 3.716594] HDMI-RX: hdmiInput0 Color Space change from '' to ''
[ 3.717345] HDMI-RX: init done
[ 3.717704] bcm_vce_init()
[ 3.718022] bcm_vce_init() 0
[ 3.741939] vice0: allocate output buffers
[ 3.776572] input: dreambox ir keyboard as /devices/virtual/input/input3
[ 3.779509] input: dreambox ir mouse as /devices/virtual/input/input4
[ 3.818043] Installing knfsd (copyright (C) 1996 [email protected]).
[ 3.852642] 0 ms:
grep: /sys/devices/platform/Fixed: No such file or directory
grep: MDIO: No such file or directory
grep: bus.0/modalias: No such file or directory
[ 4.039129] 187 ms: 9
[ 4.044205] 5 ms: 11
[ 4.051255] set current avs auto aspect to 16:9
[ 4.051834] set sb to 3(1)
[ 4.060699] 16 ms: 12
[ 4.063111] VIDEO0: set blank to 0
[ 4.063703] sync0 is off so we enable it
[ 4.064176] sync0: allocated pcroffset 0
[ 4.064645] sync0: playback!
[ 4.065003] VIDEO0: total delay: 0 (0 ms)
[ 4.070309] VIDEO0: start decode
[ 4.070711] VIDEO0: flush video decoder
[ 4.071176] VIDEO0 got pts failed !!!! (ret 0)
[ 4.078156] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered
[ 4.083358] 23 ms: 13
[ 4.100206] 17 ms: 15
[ 4.105336] 5 ms: 16
[ 4.112107] 7 ms: 17
[ 4.123625] VIDEO0: first pts 0x0
[ 4.124042] VIDEO0: EOTF changed to SDR
[ 4.124501] VIDEO0: framerate changed 3
[ 4.124946] VIDEO0: resolution changed (1920 1080)
[ 4.125508] VIDEO0: aspect changed 3
[ 4.126162] set current avs auto aspect to 16:9
[ 4.126733] set current avs auto aspect to 16:9
[ 4.127330] set sb to 3(1)
[ 4.292113] VIDEO0: enable tsm
[ 4.342157] VIDEO0: stop decode
[ 4.342540] sync0 1fff no decoder left in sync handling so disable
[ 4.343264] sync0: was last pcroffset0 user so free it
[ 4.387852] 275 ms: 19
[ 4.404779] 16 ms: 20
[ 4.428341] 24 ms: 22
ALSA: Restoring mixer settings...
[ 4.455823] 27 ms: 23
[ 4.490101] 34 ms: 24
No state is present for card PCM
Found hardware: "BCM ALSA driver" "" "" "" ""
Hardware is initialized using a generic method
No state is present for card PCM
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.min_free_kbytes = 8192
vm.dirty_ratio = 60
vm.swappiness = 30
[ 5.140485] 650 ms: 26
Starting tpmd.
[ 5.149682] 9 ms: 27
Starting stb hwclock: loading system time.
[ 5.157210] 8 ms: 28
[ 5.164707] 7 ms: 30
19:40:49 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11439 (arm-linux-gnueabihf)
19:40:49 00000000 s (main) System name = Linux
19:40:49 00000000 s (main) Host name = dm900
19:40:49 00000000 s (main) Release = 3.14-1.17-dm900
19:40:49 00000000 s (main) Version = #1 SMP Sun May 20 14:23:44 UTC 2018
19:40:49 00000000 s (main) Machine = armv7l
19:40:49 00000000 s (main) Stb model = dm900
19:40:49 00000000 s (main) Stb vumodel = vuultimo
19:40:49 00000000 s (main) Stb boxtype = vuultimo
19:40:49 00000000 s (main) The current system time is smaller than the build date (Nov 24 2018). Waiting up to 60 seconds for time to correct
19:41:50 00000000 s (main) Waiting was not successful. OSCam will be started but is UNSUPPORTED this way. Do not report any errors with this version.
19:41:50 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 449
19:41:50 00000000 s (emu) OSCam-Emu version 777
19:41:50 00000000 s (main) signal handling initialized
19:41:50 00000000 s (config) ERROR: Cannot create file "/usr/local/etc/oscam.srvid2.tmp" (errno=2 No such file or directory)
19:41:50 00000000 s (reader) emulator [emu] creating thread for device emulator
19:41:50 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
19:41:50 00000000 s (main) waiting for local card init
19:41:50 0B113864 r (emu) Stream key delayer initialized
19:41:50 0B113864 r (emu) Stream relay server initialized
19:41:50 0B113864 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
19:41:50 00000000 (emu) INFO: FFDecsa parallel mode = 32
19:41:50 277907F5 h (webif) webif: decompressed 179608 bytes back into 443160 bytes
19:41:50 277907F5 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
19:41:51 0B113864 r (reader) emulator [emu] card detected
19:41:52 0B113864 r (reader) emulator [emu] found card system emu
19:41:52 0B113864 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
19:41:52 0B113864 r (emu) Cannot open key file path: /usr/local/etc
19:41:52 0B113864 r (emu) Key file not found in: /var/keys
19:41:52 0B113864 r (emu) Total keys in memory: W:0 V:0 N:0 I:0 S:0 F:0 P:0 D:0 T:0
19:41:53 00000000 s (main) init for all local cards done
19:41:53 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
19:41:53 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
19:41:53 00000000 s (anticasc) anti cascading disabled
19:41:53 1FC3C1D1 c (client) plain dvbapi-client granted (anonymous, au=off)
19:41:53 1FC3C1D1 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0 maximum amount of possible filters is 32 (oscam limit is 32)
 
Retour
Haut Bas