Config CCcam 2.1.3 + OSCam 1.00
Hier j'ai installé une des dernières version Oscam oscam-svn5501-powerpc-tuxbox-old
Cela fonctionne toujours.
CCCAM.CFG
###############################################
# C lines de CCCAM #
###############################################
# syntax for to add a client connection to other CCcam
# add yes on end to use friends emus (non public private key/emu,etc...),
# but only works when corresponding F line on server has '1' for <shareemus>
# optional limits just like F line, but for incoming shares (ignore shares more than 'uphops' away)
#
#C: <hostname> <port> <username> <password> <wantemus> ( { caid:id
uphops), caid:id
uphops), ... } )
#
#note: if {} limits are added, <wantemus> cannot be omitted. Use either yes or no.
#
#
#
# #
#C:
# #
###############################################
# lines de OSCAM #
###############################################
#N: 127.0.0.1 10000 tnt sat 01 02 03 04 05 06 07 08 09 10 11 12 13 14
#
L: 127.0.0.1 10000 tnt sat 0500 030B00 1
#
#C: 127.0.0.1 10000 tnt sat
#
###############################################
#### WEB CONFIG ####
###############################################
# server can give some info about server and client connections
# and cardinfo using telnet or webbrowser.
#
# Switch on/off access to info
# default is yes
#
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
#
# The webinfo service can be protected with a username and password.
# This is switched off by default
#
WEBINFO USERNAME :
WEBINFO PASSWORD :
TELNETINFO USERNAME :
TELNETINFO PASSWORD :
#
# default port for telnet is 16000
# default port for web is 16001
#
#TELNETINFO LISTEN PORT : 16000
#WEBINFO LISTEN PORT : 15001
# #
###############################################
#### Config ####
###############################################
# server shall listen on this port pro incoming connections
# default port is 12000, disable server with parm -s or set port 0
#
SERVER LISTEN PORT : 12000
#
# CCCAMLAND
#SERVER LISTEN PORT : 15000
#
# INFO LISTEN PORT : 16000
# HTML INFO LISTEN PORT : 16001
#
# time in seconds to keep On Screen Display active.
# default is 0 (turned off)
#
ZAP OSD TIME :0
#
# username used to show popup (default : root)
#OSD USERNAME :
# password used to show popup (default : dreambox)
#OSD PASSWORD :
# port used to show popup (default : 80)
OSD PORT :80
#
# SERIAL READER :
# SMARTCARD WRITE DELAY :
# SMARTCARD CLOCK FREQUENCY :
#
#SMARTCARD CLOCK FREQUENCY: /dev/sci0 6300000 #lower
#SMARTCARD CLOCK FREQUENCY: /dev/sci1 6300000 #upper
#
# voici dans la dreambox ajouter dans votre ccam.cfg
#
# SMARTCARD CLOCK FREQUENCY: /dev/sci0 6000000
# SMARTCARD WRITE DELAY: /dev/sci0 100
# B: /dev/sci0
# EXTRA EMM LEVEL : yes
#
SMARTCARD CLOCK FREQUENCY: /dev/sci0 6000000
SMARTCARD WRITE DELAY: /dev/sci0 100
#
# EMM Blocker
# configure what EMM blocker you want. Add as many as readers you have attached
# default is blocking nothing
#
# B: /dev/sci0 01
# 00 - nothing
# 01 - sa blocked
# 02 - ua blocked
# 04 - ga blocked
# and sum of for combinations
#
#examples
#
#B: /dev/tts/0 07
#B: /dev/sci0 01
B: /dev/sci0 07
#B: /dev/sci1 07
#
SHOW TIMING : no
#SHOW TIMING : yes
#
# turns debugging on and off
# default is no (turned off)
#
DEBUG : no
#
# should CCcam try to read and parse newcamd.conf for server connections
# default is no (turned off)
#
NEWCAMD CONF :no
#
# disable all local EMM readers
# saves lots of CPU, but you won't get any updates anymore
# (unless you get updates from your clients)
#
# default: no
#
DISABLE EMM : no
#
# with this setting you can
# allow a client on two hops away
# to send the updates to the cardserver
#
# default : no
# TNTSAT CARD = yes
#EXTRA EMM LEVEL : no
EXTRA EMM LEVEL : yes
#
# with this setting you can
# configure how many emm listeners are started.
# for example use 2 when recording
# and viewing different systems and both need constant updates
#
# default : 1
#
EMM THREADS : 1
#
MINI OSD : no
#CAM KEY
#CAMDATA
#
BOX KEY
#BEEF ID :
#PIN :
SOFTKEY FILE : /var/keys/SoftCam.Key
#AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
CAID PRIO FILE : /var/etc/CCcam.prio
#PROVIDERINFO FILE : /var/etc/CCcam.providers
#CHANNELINFO FILE : /var/etc/CCcam.channelinfo
OSCAM.CONF
# main configuration
[global]
nice = -1
WaitForCards = 1
ClientTimeout = 5
LogFile = stdout
Level = 15
CacheDelay = 120
saveinithistory = 1
[webif]
httpport = 8080
httpuser = root
httppwd = oscam
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.1.255
httphideidleclients = 0
httpreadonly = 0
[dvbapi]
enabled = 1
boxtype = dreambox
au = 1
# protocols
#[newcamd]
#key = 0102030405060708091011121314
#port = 10000@0500:030B00
#[cs357x]
#[cs378x]
#port = 10000@0500:030B00
[cccam]
port = 10000
version = 2.1.3
reshare = 2
OSCAM.DVBAPI
#
I: 0500:030B00:4284:1788 # NT1
I: 0500:030B00:4290:1788 # NT1
OSCAM.SERVER
# reader configuration
# internal reader
[reader]
label = tntsat
protocol = internal
device = /dev/sci0
group = 1
caid = 0500
mhz = 358
cardmhz = 358
EMMCache = 1,1,2
CustomSpeed = 1
AESKeys =
0500@030B00:439726EBB6A...6C43,A79AC0DBE...58862AF26,EF3CB8D36....01041BE3
OSCAM.SERVICES
#
# definition of services
#
[services2]
caid=0500
provid =030B00
srvid=1f44, 1f4a, 1f55, 1fd8, 20a4, 20a6, 20ae, 20af, 20b3, 20b4, 20b5, 20b6, 2261, 2262, 2263, 2266, 2267, 2268, 2275, 2276, 2279, 23f4, 2407, 2408, 2458, 245e, 246c, 2472, 25e5, 25e6, 25e7, 25e8, 25e9, 25ea, 25eb, 25ec, 25ed, 25ee, 25ef, 25f0, 2649, 264a, 264b, 264c, 264d, 264e, 264f, 2650, 2651, 2652, 2653, 2654, 4284
OSCAM.USER
# user configuration
[account]
user = tnt
pwd = sat
group = 1
uniq = 0
monlevel = 0
au = 1
keepalive = 1
caid = 0500
ident = 0500:030B00