Ouais mais tu dis qu'il faut le cable OTG pour l'usb ??? quel intéret ? l'otg c'est pour le pc ? et puis via le pc il n'y a qu'une seule manip ...derrière j'ai plus qu'à remettre xbmc et yala !
"
Sinon pour la mise à jour 003 au format zip c'est ici http://www.freak-tab.de/finless/mini...ck_rom_003.zip
Que tu copie sur une clé USB (formatée en FAT) après raccordée avec le câble à l'entrée USB OTG . après tu lance ta mise à jour tu choisis ton fichier , le minix redémarre en mode recovery tu choisis l'option mettre à jour à l'aide d'un fichier externe tu sélectionne ton usb puis ton fichier et tu lance (ça prendera 5 à 10 mn)
Après le redémarrage de ta box tu aura une nouvelle interface avec une petite icône de mise à jour via OTA tu la choisi et tu sélectionne ton fichier et le tour est joué (le fichier à 500 mega à peu près alors le téléchargement selon ton débit )
N'oublie pas après de desinstalle xbmc 13.3.0 et la remplacer par 13.3.3 final"
- - - Mise à jour - - -
En fait j'ai lu le readme first.txt et çà me semble plus clair
Option 1:
1) Copy all the files from this ZIP onto the SDcard you should have:
factory_update_param.aml
minix_x8hplus_stock003.zip
recovery.img
README FIRST.TXT does not have to be copied.
2) Power off the X8 and unplug power.
3) Plug power back in, Make sure it doesnt boot!
4) Using a tooth pick go in and press and hold the reset button.
You know you have pressed it if you feel the click.
5) While holding the reset button down, press the power button and keep holding the reset button!
6) While holding the reset button, wait until you see the logo and you can then release the reset button.
7) The ROM should auto install and reboot when done.
Your Done!